Savin 4015, 4018d manual If You Cannot Make Copies As You Want, Basic, Edit, Combine

KirC2_ENcopyF_FM.book Page 41 Monday, September 22, 2003 11:36 AM

If You Cannot Make Copies As You Want

If You Cannot Make Copies As You Want

This section explains causes and remedies when copy results are not as expect- ed.

❖ Basic

Problem	Causes	Solutions
You cannot combine sever-	Selected functions cannot	Check the combination of functions
al functions.	be used together.	and make the settings again.

Reference

p.63 “Combination Chart”

❖Edit

3

Problem	Causes	Solutions
When using the Duplex	You set a wide erased mar-	Set a narrower margin with User
Margin function, parts of	gin.
the original image are not		Tools. You can set the width be-
	There is a lack of margin
copied.		tween 0–50 mm (0"–2"). See p.55
	space on the opposite side	“Duplex Margin”.
	of the binding position.

❖Combine

Problem	Causes	Solutions
When using Combine,	You specified a reproduc-	When you specify a reproduction
parts of the image are not	tion ratio that does not	ratio using the Manual Paper Select
copied.	match the sizes of your	function, make sure the ratio match-
	originals and copy paper.	es your originals and the copy pa-
		per.

		Note
		❒ Select the correct reproduction
		ratio before using the Combine
		function.
	Your originals are not iden-	Use originals that are identical in
	tical in size and direction.	size and direction.
Copies are not in correct or-	You placed the originals in	When placing a stack of originals in
der.	the incorrect order.	the ADF or ARDF, the last page
		should be on the bottom.
		If you place an original on the expo-
		sure glass, start with the first page to
		be copied.

41