Horizontal size Vertical size Extender Paper guides | Savin 4015

KirC2_ENcopyF_FM.book Page 23 Monday, September 22, 2003 11:36 AM

Copying from the Bypass Tray

C Insert the paper with the side you want to copy facing down, and then adjust the paper guide with the paper size.

4	1
	2	3
		3
		ZENY120E

1.Horizontal size

2.Vertical size

3.Extender

4.Paper guides

Note

❒If the guides are not flush against the copy paper, images might be skewed or paper mis- feeds might occur.

❒Do not stack paper over the lim- it mark, otherwise images might be skewed or paper mis- feeds might occur.

❒Swing out the extender to sup-

port paper sizes larger than A4L, 81/2" ⋅ 11"L.

❒Fan paper to get air between the sheets and avoid a multi-sheet feed.

D Pull down the paper guide release the lever (step B).

The bypass tray is selected on the display.

Note

❒If [Bypass] is not selected on the display, select [Bypass] using {U} or {T}, and then press the {#} key.

E Select the paper size and type.

2

When copying onto regular size paper

A Select [Paper Size] using {U} or {T}, and then press the {OK} key.

B Select [Regular Size] using {U} or {T}, and then press the {OK} key.

C Select the paper size using the scroll keys, and then press the {OK} key.

The “Accepted” message ap- pears.

23

Image 31

Savin 4015, 4018d Horizontal size Vertical size Extender Paper guides, Pull down the paper guide release the lever step B

Contents

Copy Reference Introduction Manuals for This Machine Manuals for ScanRouter V2 Lite Manuals for DeskTopBinder V2 LiteOther manuals Table of Contents If Your Machine Does Not Operate As You Want Accessing User Tools Copier FeaturesSettings You Can Change with User Tools Dos and Donts Where to Put Your Machine Combination Chart Supplementary Information SpecificationsPage Page Remarque concernant les utilisateurs au Canada Avertissement Symbols How to Read This ManualNames of Major Options Safety During Operation Safety InformationPage AAI029S Machine Types Control Panel Options fully installedCopier only Lighter and Darker Cancel keyCombine/Series key Sort key Display Reading the Display and Using KeysInitial copy display Scroll keys Operation switch right side of the control panel Turning On the PowerTurning On the Main Power Turning On the Power Turning Off the Main Power Turning Off the Power Saving Energy Auto Off/ Low Power Inch version Sizes and Weights of Recommended OriginalsOriginals Metric version Sizes Detectable with Auto Paper Select Sizes difficult to detect Missing Image AreaExposure glass ADF or Ardf Original Orientation Placing OriginalsPlacing Originals on the Exposure Glass Limit mark Document guide Ardf Placing custom size originals To clear an entered value Basic ProcedureTo switch between pages or select functions To stop the machine during a multi- copy run Paper guide release lever Copying from the Bypass TrayOpen the bypass tray Push up the paper guide release lever Pull down the paper guide release the lever step B Select Paper Size using U or T, and then press the OK keySelect Regular Size using U or T, and then press the OK key Horizontal size Vertical size Extender Paper guides Then press the OK Select Paper Size using U orSelect Custom Size using U or T, and then press the OK key Feeds Select Thick Paper using U or T, and then press the OK key Selecting Copy Paper Adjusting Image DensitySelecting Original Type Setting Copier Functions Select the paper tray or bypass tray using U or T Preset Reduce/EnlargeMake sure Auto Paper Select is se- lected Base Point ZoomPress Reduce or Enlarge Press the OK key Adjust the ratio using U or TAuto Reduce/Enlarge Enter the ratio Rotate Sort SortSort Select Sort or Rotate Sort, and then press the OK key Duplex Type 3 onlySided → 2 Sided Sided → 2 Sided Optional Ardf is required Press the Duplex key Original orientation and completed copies Sided 1 Page → Combine 1 Side Optional Ardf is required One-Sided CombineSided 2 Pages → Combine 1 Side Sided 4 Pages → Combine 1 Side Orientation of the original and image Optional Ardf is requiredPosition of combine Sided 2 Pages → Combine 1 Side Sided 4 Pages → Combine 2 Side Two-Sided Combine Type 3 onlySided 8 Pages → Combine 2 Side Sided 4 Pages → Combine 2 Side Optional Ardf is required Then press the OK key Top or Top to Bottom using U or Press the Combine/Series key Series CopiesSided→1 Sided Optional Ardf is required Book→1 Sided Place your original, and then press the Start key Select the paper tray using U or T If Your Machine Does Not Operate As You Want When a Message Is Displayed If You Cannot Make Clear Copies Problem Causes Solutions Combine If You Cannot Make Copies As You WantBasic Edit Duplex Type 3 only When Memory Is Full Loading Paper Loading PaperPush the paper tray in, until it stops Original Orientation Orientation-Fixed Paper or Two-Sided Paper Loaded paper orientation For MFP Used Toner Adding TonerHandling Toner Toner Storage Removing Toner Inserting Toner Troubleshooting Changing Default Settings Accessing User Tools Copier FeaturesPress the User Tools/Counter key Change is made, and the ma- chine is ready to copy Quitting User Tools APS/ Auto R/E Priority Settings You Can Change with User ToolsAuto Tray Switching Original Type Setting Original Count Display Duplex Mode PriorityOrientation Max. Number of Sets Rotate Sort Preset R/E PriorityLetterhead Setting Duplex Margin User Tools Copier Features Dos and Donts Remarks Environments to avoid Where to Put Your MachineMachine Environment Optimum environmental conditions Moving Power Connection Access to the Machine Cleaning the machine Cleaning the Exposure GlassCleaning the Exposure Glass Cover Cleaning the ADF or Ardf Remarks Combination Chart Specifications Supplementary Information Preset Enlarge/ReduceBypass Tray Copy Sort, Rotate Sort Zoom Duplex Margin Type 3 only Index Combine, 34 orientation Orientation and completed copies Adding Handling Inserting Removing Storage Used Memo Means Power on EN USA B121-6607