Adding Toner, Handling Toner, Toner Storage | Savin 4015, 4018d

KirC2_ENcopyF_FM.book Page 47 Monday, September 22, 2003 11:36 AM

D Adding Toner

D Adding Toner

When D appears, it is time to add toner.

Handling Toner

RWARNING:

•Do not incinerate used toner or toner containers. Toner dust might ig- nite when exposed to an open flame. Dispose of used toner containers in accordance with local regulations.

RCAUTION:

•Keep toner (used or unused) and toner containers out of reach of children.

Important

❒Faults may occur if you use toner other than the recommended type.

❒When adding toner, do not turn off the operation switch. If you do, settings will be lost.

❒Always add toner when the machine instructs you.

❒Do not repeatedly install and remove toner bottles. This will result in toner leakage.

❒Do not shake the removed toner bottle. Remaining toner might scatter.

Note

❒You can make about 50 copies even after the D symbol begins flashing, but replace toner early to prevent poor copy quality.

Toner Storage

When storing toner, the following precautions should always be followed:

•Store toner containers in a cool, dry place free from direct sunlight.

•Store on a flat surface.

3

Used Toner

Note

❒Toner cannot be re-used.

47

Image 55

Savin 4015, 4018d manual Adding Toner, Handling Toner, Toner Storage, Used Toner

Contents

Copy Reference Introduction Manuals for This Machine Manuals for ScanRouter V2 Lite Manuals for DeskTopBinder V2 LiteOther manuals Table of Contents If Your Machine Does Not Operate As You Want Accessing User Tools Copier FeaturesSettings You Can Change with User Tools Dos and Donts Where to Put Your Machine Combination Chart Supplementary Information SpecificationsPage Page Remarque concernant les utilisateurs au Canada Avertissement Symbols How to Read This ManualNames of Major Options Safety During Operation Safety InformationPage AAI029S Machine Types Control Panel Options fully installedCopier only Lighter and Darker Cancel keyCombine/Series key Sort key Display Reading the Display and Using KeysInitial copy display Scroll keys Operation switch right side of the control panel Turning On the PowerTurning On the Main Power Turning On the Power Turning Off the Main Power Turning Off the Power Saving Energy Auto Off/ Low Power Inch version Sizes and Weights of Recommended OriginalsOriginals Metric version Sizes Detectable with Auto Paper Select Sizes difficult to detect Missing Image AreaExposure glass ADF or Ardf Original Orientation Placing OriginalsPlacing Originals on the Exposure Glass Limit mark Document guide Ardf Placing custom size originals To clear an entered value Basic ProcedureTo switch between pages or select functions To stop the machine during a multi- copy run Paper guide release lever Copying from the Bypass TrayOpen the bypass tray Push up the paper guide release lever Pull down the paper guide release the lever step B Select Paper Size using U or T, and then press the OK keySelect Regular Size using U or T, and then press the OK key Horizontal size Vertical size Extender Paper guides Then press the OK Select Paper Size using U orSelect Custom Size using U or T, and then press the OK key Feeds Select Thick Paper using U or T, and then press the OK key Selecting Copy Paper Adjusting Image DensitySelecting Original Type Setting Copier Functions Select the paper tray or bypass tray using U or T Preset Reduce/EnlargeMake sure Auto Paper Select is se- lected Base Point ZoomPress Reduce or Enlarge Press the OK key Adjust the ratio using U or TAuto Reduce/Enlarge Enter the ratio Rotate Sort SortSort Select Sort or Rotate Sort, and then press the OK key Duplex Type 3 onlySided → 2 Sided Sided → 2 Sided Optional Ardf is required Press the Duplex key Original orientation and completed copies Sided 1 Page → Combine 1 Side Optional Ardf is required One-Sided CombineSided 2 Pages → Combine 1 Side Sided 4 Pages → Combine 1 Side Orientation of the original and image Optional Ardf is requiredPosition of combine Sided 2 Pages → Combine 1 Side Sided 4 Pages → Combine 2 Side Two-Sided Combine Type 3 onlySided 8 Pages → Combine 2 Side Sided 4 Pages → Combine 2 Side Optional Ardf is required Then press the OK key Top or Top to Bottom using U or Press the Combine/Series key Series CopiesSided→1 Sided Optional Ardf is required Book→1 Sided Place your original, and then press the Start key Select the paper tray using U or T If Your Machine Does Not Operate As You Want When a Message Is Displayed If You Cannot Make Clear Copies Problem Causes Solutions Combine If You Cannot Make Copies As You WantBasic Edit Duplex Type 3 only When Memory Is Full Loading Paper Loading PaperPush the paper tray in, until it stops Original Orientation Orientation-Fixed Paper or Two-Sided Paper Loaded paper orientation For MFP Used Toner Adding TonerHandling Toner Toner Storage Removing Toner Inserting Toner Troubleshooting Changing Default Settings Accessing User Tools Copier FeaturesPress the User Tools/Counter key Change is made, and the ma- chine is ready to copy Quitting User Tools APS/ Auto R/E Priority Settings You Can Change with User ToolsAuto Tray Switching Original Type Setting Original Count Display Duplex Mode PriorityOrientation Max. Number of Sets Rotate Sort Preset R/E PriorityLetterhead Setting Duplex Margin User Tools Copier Features Dos and Donts Remarks Environments to avoid Where to Put Your MachineMachine Environment Optimum environmental conditions Moving Power Connection Access to the Machine Cleaning the machine Cleaning the Exposure GlassCleaning the Exposure Glass Cover Cleaning the ADF or Ardf Remarks Combination Chart Specifications Supplementary Information Preset Enlarge/ReduceBypass Tray Copy Sort, Rotate Sort Zoom Duplex Margin Type 3 only Index Combine, 34 orientation Orientation and completed copies Adding Handling Inserting Removing Storage Used Memo Means Power on EN USA B121-6607