KirC2_ENcopyF_FM.book Page 19 Monday, September 22, 2003 11:36 AM

Placing Originals

Placing Originals in the ADF or

ARDF

Settings should be made in the fol- lowing situations:

When placing custom size originals: p.20 “Placing custom size origi- nals”

Note

Do not stack originals over the lim- it mark on the side fence of the ADF or ARDF.

The last page should be on the bot- tom.

Do not cover the sensors with your hands, or place objects on them. Doing so could cause the size to be detected incorrectly, or the paper misfeed error message to appear. Also, do not place anything on the cover, as this too could cause a malfunction.

ARDF

ADF

1

AAI036S

1.Sensor

A Set the document guide to the original size.

B Align the edges of the originals and place them in the ADF or ARDF with the side to be copied facing up.

AAI026S

1.Limit mark

2.Document guide

Note

Straighten curls in the originals before placing them in the ADF or ARDF.

To prevent multiple sheets feed- ing in at once, fan the originals before placing them in the ADF, or ARDF.

Set the original squarely.

19

Page 27
Image 27
Savin 4018d, 4015 manual Ardf, Limit mark Document guide