Savin 4018d, 4015 If Your Machine Does Not Operate As You Want, When a Message Is Displayed

KirC2_ENcopyF_FM.book Page 39 Monday, September 22, 2003 11:36 AM

3. Troubleshooting

If Your Machine Does Not Operate As You Want

When a Message Is Displayed

The following chart contains explanations for common messages. If other mes- sages appear, follow the instructions as they are displayed.

Note

❒For messages not listed here, see General Settings Guide.

Message	Causes	Solutions
Cannot detect original	Improper original is	Select paper manually, not
size	placed. See p.17 “Sizes	with the Auto Paper Select
	difficult to detect”.	function, and do not use the
		Auto Reduce/Enlarge func-
		tion.
		Input the both horizontal and
		vertical sizes of the non-stan-
		dard original.
		Place the original on the expo-
		sure glass. See p.18 “Placing
		Originals on the Exposure
		Glass” .
	Original is not placed.	Place your originals.
Check original orienta-	Original is not placed	Change original orientation.
tion	in the proper orienta-
	tion.
Check paper size	Improper paper size is	If you press the {Start} key,
	set.	copy will start onto the select-
		ed paper.
Rotate Sort is unavail-	A size of paper for	Select a proper paper size. See
able with this paper size	which Rotate Sort is	p.30 “Sort”.
	not available is select-
	ed.
Cannot dup. copy this	A paper size not avail-	The following paper sizes are
size	able with the Duplex	available for the Duplex func-
	function has been se-	tion: 11"⋅17"L, 81/2"⋅14" L
	lected.	and 81/2"⋅11"KL. Select one
		of these sizes.
Max. number of sets is *	The number of copies	You can change the maximum
	exceeds maximum	copy quantity. See p.54 “Max.
	copy quantity.	Number of Sets” .

39