Turning Off the Power, Turning Off the Main Power | Savin 4018d

KirC2_ENcopyF_FM.book Page 13 Monday, September 22, 2003 11:36 AM

Turning Off the Power

A Make sure the exposure glass cov- er, ADF, or ARDF is in the right position.

B Press the operation switch.

The On indicator goes off.

Note

❒Even if you press the operation switch, the indicator does not go out, but blinks in the follow- ing cases:

•During communication with external equipment.

Turning Off the Main Power

Important

❒Do not turn off the main power switch when the On indicator is lit or blinking. Doing so may result in damage to the memory.

❒Make sure 100% is shown as avail- able memory on the initial scanner display before turning off the main power switch.

❒Be sure to turn off the main power switch before pulling out the pow- er plug. Not doing this may result in damage to the memory.

A Be sure the On indicator is not lit. B Turn off the main power switch.

The main power indicator goes out.

-When the fax unit (optional) is installed

When the main power switch is turned off while using the fax func- tion, waiting fax and print jobs may be canceled, and incoming fax docu- ments not received. If you have to turn off this switch for some reason, keep the following points in mind:

Important

❒Make sure 100% is shown as avail- able memory on the display before turning off the main power switch or unplugging the power cord. Fax files in memory are deleted an hour after you turn off the main power switch or unplug the power cord. See ”Turning Off the Main Power/In Case of a Power Fail- ure”, Facsimile Reference <Advanced Features>.

❒If the On indicator does not go out, but blinks in dial-in mode even if you press the operation switch, check the explanations below and turn off the main power switch.

•the computer is not controlling the machine.

•the machine is not receiving a fax.

13

Image 21

Savin 4018d, 4015 manual Turning Off the Power, Turning Off the Main Power

Contents

Copy Reference Introduction Manuals for This Machine Manuals for DeskTopBinder V2 Lite Manuals for ScanRouter V2 LiteOther manuals Table of Contents Settings You Can Change with User Tools Accessing User Tools Copier FeaturesDos and Donts Where to Put Your Machine If Your Machine Does Not Operate As You Want Combination Chart Supplementary Information SpecificationsPage Page Remarque concernant les utilisateurs au Canada Avertissement How to Read This Manual SymbolsNames of Major Options Safety During Operation Safety InformationPage AAI029S Machine Types Options fully installed Control PanelCopier only Combine/Series key Cancel keySort key Lighter and Darker Reading the Display and Using Keys DisplayInitial copy display Scroll keys Turning On the Main Power Turning On the PowerTurning On the Power Operation switch right side of the control panel Turning Off the Main Power Turning Off the Power Saving Energy Auto Off/ Low Power Originals Sizes and Weights of Recommended OriginalsMetric version Inch version Sizes Detectable with Auto Paper Select Exposure glass Missing Image AreaADF or Ardf Sizes difficult to detect Placing Originals Original OrientationPlacing Originals on the Exposure Glass Limit mark Document guide Ardf Placing custom size originals To switch between pages or select functions Basic ProcedureTo stop the machine during a multi- copy run To clear an entered value Open the bypass tray Copying from the Bypass TrayPush up the paper guide release lever Paper guide release lever Select Regular Size using U or T, and then press the OK key Select Paper Size using U or T, and then press the OK keyHorizontal size Vertical size Extender Paper guides Pull down the paper guide release the lever step B Select Custom Size using U or T, and then press the OK key Select Paper Size using U orFeeds Then press the OK Select Thick Paper using U or T, and then press the OK key Selecting Original Type Setting Adjusting Image DensityCopier Functions Selecting Copy Paper Preset Reduce/Enlarge Select the paper tray or bypass tray using U or TMake sure Auto Paper Select is se- lected Zoom Base PointPress Reduce or Enlarge Auto Reduce/Enlarge Adjust the ratio using U or TEnter the ratio Press the OK key Sort Rotate SortSort Sided → 2 Sided Duplex Type 3 onlySided → 2 Sided Optional Ardf is required Select Sort or Rotate Sort, and then press the OK key Press the Duplex key Original orientation and completed copies Sided 2 Pages → Combine 1 Side One-Sided CombineSided 4 Pages → Combine 1 Side Sided 1 Page → Combine 1 Side Optional Ardf is required Position of combine Optional Ardf is requiredSided 2 Pages → Combine 1 Side Orientation of the original and image Sided 8 Pages → Combine 2 Side Two-Sided Combine Type 3 onlySided 4 Pages → Combine 2 Side Optional Ardf is required Sided 4 Pages → Combine 2 Side Then press the OK key Top or Top to Bottom using U or Sided→1 Sided Optional Ardf is required Series CopiesBook→1 Sided Press the Combine/Series key Place your original, and then press the Start key Select the paper tray using U or T If Your Machine Does Not Operate As You Want When a Message Is Displayed If You Cannot Make Clear Copies Problem Causes Solutions Basic If You Cannot Make Copies As You WantEdit Combine Duplex Type 3 only When Memory Is Full Loading Paper Loading PaperPush the paper tray in, until it stops Original Orientation Orientation-Fixed Paper or Two-Sided Paper Loaded paper orientation For MFP Handling Toner Adding TonerToner Storage Used Toner Removing Toner Inserting Toner Troubleshooting Accessing User Tools Copier Features Changing Default SettingsPress the User Tools/Counter key Change is made, and the ma- chine is ready to copy Quitting User Tools Auto Tray Switching Settings You Can Change with User ToolsOriginal Type Setting APS/ Auto R/E Priority Orientation Duplex Mode PriorityMax. Number of Sets Original Count Display Letterhead Setting Preset R/E PriorityDuplex Margin Rotate Sort User Tools Copier Features Dos and Donts Remarks Machine Environment Where to Put Your MachineOptimum environmental conditions Environments to avoid Moving Power Connection Access to the Machine Cleaning the Exposure Glass Cover Cleaning the Exposure GlassCleaning the ADF or Ardf Cleaning the machine Remarks Combination Chart Specifications Preset Enlarge/Reduce Supplementary InformationBypass Tray Copy Sort, Rotate Sort Zoom Duplex Margin Type 3 only Index Combine, 34 orientation Orientation and completed copies Adding Handling Inserting Removing Storage Used Memo Means Power on EN USA B121-6607