Auto Reduce/Enlarge, Enter the ratio, Press the OK key | Savin 4015

KirC2_ENcopyF_FM.book Page 29 Monday, September 22, 2003 11:36 AM

Copier Functions

C Enter the ratio.	Auto Reduce/Enlarge

To select the ratio using {U} and

{T}

A Adjust the ratio using {U} or {T}.

Note

❒If you have incorrectly en- tered the ratio, readjust using

{U} or {T}.

❒To change the ratio in incre- ments of 10%, press and hold down {U} or {T}.

BPress the {OK} key.

The “Accepted” message ap- pears.

To enter the ratio using the number keys

A Enter the desired ratio using the number keys.

BPress the {OK} key.

The “Accepted” message ap- pears.

D Place your originals, and then press the {Start} key.

You can choose an appropriate repro- duction ratio based on the paper and original sizes you select.

2

Note

❒You cannot use the bypass tray with this function.

❒When using Auto Reduce/Enlarge, see the following table for original sizes and orientations you can use:

❖ Metric version

	Original size and
Original location	orientation

Exposure glass	A3L, B4 JISL,
	A4KL, B5 JISK,
	81/2" ⋅ 13"L

ADF or ARDF	A3L, B4 JISL,
	A4KL, B5
	JISKL, A5KL,
	81/2 " ⋅ 13"L

❖Inch version

	Original size and
Original location	orientation

Exposure glass	11" ⋅ 17"L, 81/2" ⋅
	14"L, 81/2" ⋅ 11"
	KL, 81/2" ⋅ 13"L
ADF or ARDF	11" ⋅ 17"L, 81/2" ⋅
	14"L, 81/2" ⋅ 11"
	KL, 51/2" ⋅ 81/2"
	KL

Reference

p.17 “Sizes difficult to detect”

29

Image 37

Savin 4015, 4018d manual Auto Reduce/Enlarge, Enter the ratio, Adjust the ratio using U or T, Press the OK key

Contents

Copy Reference Introduction Manuals for This Machine Manuals for ScanRouter V2 Lite Manuals for DeskTopBinder V2 LiteOther manuals Table of Contents Settings You Can Change with User Tools Accessing User Tools Copier FeaturesDos and Donts Where to Put Your Machine If Your Machine Does Not Operate As You Want Combination Chart Supplementary Information SpecificationsPage Page Remarque concernant les utilisateurs au Canada Avertissement Symbols How to Read This ManualNames of Major Options Safety During Operation Safety InformationPage AAI029S Machine Types Control Panel Options fully installedCopier only Combine/Series key Cancel keySort key Lighter and Darker Display Reading the Display and Using KeysInitial copy display Scroll keys Turning On the Main Power Turning On the PowerTurning On the Power Operation switch right side of the control panel Turning Off the Main Power Turning Off the Power Saving Energy Auto Off/ Low Power Originals Sizes and Weights of Recommended OriginalsMetric version Inch version Sizes Detectable with Auto Paper Select Exposure glass Missing Image AreaADF or Ardf Sizes difficult to detect Original Orientation Placing OriginalsPlacing Originals on the Exposure Glass Limit mark Document guide Ardf Placing custom size originals To switch between pages or select functions Basic ProcedureTo stop the machine during a multi- copy run To clear an entered value Open the bypass tray Copying from the Bypass TrayPush up the paper guide release lever Paper guide release lever Select Regular Size using U or T, and then press the OK key Select Paper Size using U or T, and then press the OK keyHorizontal size Vertical size Extender Paper guides Pull down the paper guide release the lever step B Select Custom Size using U or T, and then press the OK key Select Paper Size using U orFeeds Then press the OK Select Thick Paper using U or T, and then press the OK key Selecting Original Type Setting Adjusting Image DensityCopier Functions Selecting Copy Paper Select the paper tray or bypass tray using U or T Preset Reduce/EnlargeMake sure Auto Paper Select is se- lected Base Point ZoomPress Reduce or Enlarge Auto Reduce/Enlarge Adjust the ratio using U or TEnter the ratio Press the OK key Rotate Sort SortSort Sided → 2 Sided Duplex Type 3 onlySided → 2 Sided Optional Ardf is required Select Sort or Rotate Sort, and then press the OK key Press the Duplex key Original orientation and completed copies Sided 2 Pages → Combine 1 Side One-Sided CombineSided 4 Pages → Combine 1 Side Sided 1 Page → Combine 1 Side Optional Ardf is required Position of combine Optional Ardf is requiredSided 2 Pages → Combine 1 Side Orientation of the original and image Sided 8 Pages → Combine 2 Side Two-Sided Combine Type 3 onlySided 4 Pages → Combine 2 Side Optional Ardf is required Sided 4 Pages → Combine 2 Side Then press the OK key Top or Top to Bottom using U or Sided→1 Sided Optional Ardf is required Series CopiesBook→1 Sided Press the Combine/Series key Place your original, and then press the Start key Select the paper tray using U or T If Your Machine Does Not Operate As You Want When a Message Is Displayed If You Cannot Make Clear Copies Problem Causes Solutions Basic If You Cannot Make Copies As You WantEdit Combine Duplex Type 3 only When Memory Is Full Loading Paper Loading PaperPush the paper tray in, until it stops Original Orientation Orientation-Fixed Paper or Two-Sided Paper Loaded paper orientation For MFP Handling Toner Adding TonerToner Storage Used Toner Removing Toner Inserting Toner Troubleshooting Changing Default Settings Accessing User Tools Copier FeaturesPress the User Tools/Counter key Change is made, and the ma- chine is ready to copy Quitting User Tools Auto Tray Switching Settings You Can Change with User ToolsOriginal Type Setting APS/ Auto R/E Priority Orientation Duplex Mode PriorityMax. Number of Sets Original Count Display Letterhead Setting Preset R/E PriorityDuplex Margin Rotate Sort User Tools Copier Features Dos and Donts Remarks Machine Environment Where to Put Your MachineOptimum environmental conditions Environments to avoid Moving Power Connection Access to the Machine Cleaning the Exposure Glass Cover Cleaning the Exposure GlassCleaning the ADF or Ardf Cleaning the machine Remarks Combination Chart Specifications Supplementary Information Preset Enlarge/ReduceBypass Tray Copy Sort, Rotate Sort Zoom Duplex Margin Type 3 only Index Combine, 34 orientation Orientation and completed copies Adding Handling Inserting Removing Storage Used Memo Means Power on EN USA B121-6607