Reading the Display and Using Keys | Savin 4018d, 4015 specs

KirC2_ENcopyF_FM.book Page 10 Monday, September 22, 2003 11:36 AM

Display

This section explains how to read the display and use the Selection key for the initial copy display.

Note

❒The copy display is set as the default screen when the machine is turned on.

❖Initial copy display

1

2

3

		AAX024S


		4
				AAI024S
1. Operational status or messages			3. Number of copies set.

2.Messages and the selected tray appear here. Currently selected items appear in brackets.

4.Reduce/Enlarge ratio function for non-fixed ratios.

Reading the Display and Using Keys

This section explains how to read the display and use the selection key for the initial copy display.

Note

❒The copy display is set as the default screen when the machine is turned on.

4

Cancel OK

1

2

3

1.Selection keys

Correspond to items at the bottom line on the display.

Example: initial copy display

•When the instruction “press [100%]” appears in this manual, press the left selection key.

AAI048S

•When the instruction “press [R/E]” ap- pears in this manual, press the center selection key.

•When the instruction “press [Auto R/E]” appears in this manual, press the right selection key.

10

Image 18

Savin 4018d, 4015 manual Reading the Display and Using Keys, Initial copy display

Contents

Copy Reference Introduction Manuals for This Machine Manuals for DeskTopBinder V2 Lite Manuals for ScanRouter V2 LiteOther manuals Table of Contents Dos and Donts Where to Put Your Machine Accessing User Tools Copier FeaturesSettings You Can Change with User Tools If Your Machine Does Not Operate As You Want Specifications Combination Chart Supplementary InformationPage Page Remarque concernant les utilisateurs au Canada Avertissement How to Read This Manual SymbolsNames of Major Options Safety Information Safety During OperationPage AAI029S Machine Types Options fully installed Control PanelCopier only Sort key Cancel keyCombine/Series key Lighter and Darker Reading the Display and Using Keys DisplayInitial copy display Scroll keys Turning On the Power Turning On the PowerTurning On the Main Power Operation switch right side of the control panel Turning Off the Power Turning Off the Main Power Auto Off/ Low Power Saving Energy Metric version Sizes and Weights of Recommended OriginalsOriginals Inch version Sizes Detectable with Auto Paper Select ADF or Ardf Missing Image AreaExposure glass Sizes difficult to detect Placing Originals Original OrientationPlacing Originals on the Exposure Glass Ardf Limit mark Document guide Placing custom size originals To stop the machine during a multi- copy run Basic ProcedureTo switch between pages or select functions To clear an entered value Push up the paper guide release lever Copying from the Bypass TrayOpen the bypass tray Paper guide release lever Horizontal size Vertical size Extender Paper guides Select Paper Size using U or T, and then press the OK keySelect Regular Size using U or T, and then press the OK key Pull down the paper guide release the lever step B Feeds Select Paper Size using U orSelect Custom Size using U or T, and then press the OK key Then press the OK Select Thick Paper using U or T, and then press the OK key Copier Functions Adjusting Image DensitySelecting Original Type Setting Selecting Copy Paper Preset Reduce/Enlarge Select the paper tray or bypass tray using U or TMake sure Auto Paper Select is se- lected Zoom Base PointPress Reduce or Enlarge Enter the ratio Adjust the ratio using U or TAuto Reduce/Enlarge Press the OK key Sort Rotate SortSort Sided → 2 Sided Optional Ardf is required Duplex Type 3 onlySided → 2 Sided Select Sort or Rotate Sort, and then press the OK key Original orientation and completed copies Press the Duplex key Sided 4 Pages → Combine 1 Side One-Sided CombineSided 2 Pages → Combine 1 Side Sided 1 Page → Combine 1 Side Optional Ardf is required Sided 2 Pages → Combine 1 Side Optional Ardf is requiredPosition of combine Orientation of the original and image Sided 4 Pages → Combine 2 Side Optional Ardf is required Two-Sided Combine Type 3 onlySided 8 Pages → Combine 2 Side Sided 4 Pages → Combine 2 Side Top or Top to Bottom using U or Then press the OK key Book→1 Sided Series CopiesSided→1 Sided Optional Ardf is required Press the Combine/Series key Select the paper tray using U or T Place your original, and then press the Start key When a Message Is Displayed If Your Machine Does Not Operate As You Want Problem Causes Solutions If You Cannot Make Clear Copies Edit If You Cannot Make Copies As You WantBasic Combine When Memory Is Full Duplex Type 3 only Loading Paper Loading PaperPush the paper tray in, until it stops Orientation-Fixed Paper or Two-Sided Paper Original Orientation Loaded paper orientation For MFP Toner Storage Adding TonerHandling Toner Used Toner Removing Toner Inserting Toner Troubleshooting Accessing User Tools Copier Features Changing Default SettingsPress the User Tools/Counter key Quitting User Tools Change is made, and the ma- chine is ready to copy Original Type Setting Settings You Can Change with User ToolsAuto Tray Switching APS/ Auto R/E Priority Max. Number of Sets Duplex Mode PriorityOrientation Original Count Display Duplex Margin Preset R/E PriorityLetterhead Setting Rotate Sort User Tools Copier Features Remarks Dos and Donts Optimum environmental conditions Where to Put Your MachineMachine Environment Environments to avoid Power Connection Moving Access to the Machine Cleaning the ADF or Ardf Cleaning the Exposure GlassCleaning the Exposure Glass Cover Cleaning the machine Remarks Specifications Combination Chart Preset Enlarge/Reduce Supplementary InformationBypass Tray Copy Zoom Sort, Rotate Sort Duplex Margin Type 3 only Index Combine, 34 orientation Orientation and completed copies Adding Handling Inserting Removing Storage Used Memo Means Power on EN USA B121-6607