Savin 4015, 4018d manual Moving, Power Connection

KirC2_ENcopyF_FM.book Page 59 Monday, September 22, 2003 11:36 AM

Where to Put Your Machine

Moving

RCAUTION:

•Unplug the power cord from the wall outlet before you move the machine. While moving the ma- chine, you should take care that the power cord will not be dam- aged under the machine.

RCAUTION:

•Before moving the machine, be sure to pull all four handles fully out. If not, an injury might occur. After moving the machine, return the four handles to their original positions.

•When the optional paper tray unit is installed, do not push the up- per part of the main unit horizon- tally. An injury might occur if the paper tray unit becomes de- tached from the main unit.

Important

❒Be careful when moving the ma- chine. Take the following precau- tions:

•Turn off the main power. See p.13 “Turning Off the Main Power”.

•Unplug the power cord from the wall outlet. When you pull out the plug from the socket, grip the plug to avoid damag- ing the cord, thereby reducing the risk of fire or electric shock.

•Close all covers and trays, in- cluding the front cover and by- pass tray.

❒Do not take off the holding stand.

❒Protect the machine from strong shocks. Impact can damage the memory.

Power Connection

RWARNING:

•Connect the machine only to the power source described on the inside front cover of this manual. Connect the power cord directly into a wall outlet and do not use an extension cord.

•Do not damage, break or make any modifications to the power cord. Do not place heavy ob- jects on it. Do not pull it hard nor bend it more than neces- sary. These actions could cause an electric shock or fire.

RCAUTION:

•Unplug the power cord from the wall outlet before you move the machine. While moving the ma- chine, you should take care that the power cord will not be dam- aged under the machine.

RCAUTION:

•When you disconnect the power plug from the wall outlet, always pull the plug (not the cable).

•When the main power switch is in the stand-by position, the optional anti-condensation heaters are on. In an emergency, unplug the ma- chine's power cord.

•When you unplug the power cord, the anti-condensation heaters turn off.

•Make sure the plug is inserted firmly in the wall outlet.

•Voltage must not fluctuate by more than 10%.

•The wall outlet shall be installed near the machine and shall be eas- ily accessible.

5

59