2Connect one end of the earth wire to the AC Unit earth terminal, and the other end to the indoor earth terminal. The AC Unit earth terminal has a Bolt and Nut combination. Take off the Nut, pass the end of earth wire through the Bolt, and fasten the Nut.

Note that the Earth Wire is incorporated in the Power Cord for the Areas of AC 120V (USA) and AC 220 ~ 240V, and therefore, this procedure is not necessary.

Connect the Earth Wire to the Earth Terminal.

FIG. 5. 4 b Earth Wire Connection

3Firmly insert the power plug into the socket outlet.

Insert the opposite side of Power Cord plug to the AC Unit's connector ("INLET").

4Perform wiring for the Power Cord

and Earth Wire. Install protective covering for the Power Cord and Earth Wire.

Wiring Cover

FIG. 5. 4 c Connecting Power Cord and Earth Wire

In case the Power Plug is apt to come out of place, secure the

Power Cord to the periphery of the AC Unit with the Cord

Clamp (an accessory).

HOW TO USE THE CORD CLAMP

14

Page 21
Image 21
Sega 999-1108 owner manual HOW to USE the Cord Clamp