Eb. GAS ASSIGNMENTS

This screen enables to set the volume value of the gas pedal (accelerator). The MIN indicates the volume value when the pedal is not stepped on and the MAX when stepped on.

Reset the volume value on this screen when the operability of the gas pedal is undesirable. Also newly set the volume value on this screen whenever you have adjusted or replaced the volume.

GAS ASSIGNMENTS

(MIN -40 : MAX 40 : DEFAULT 0) GAS = 0

0

^ ^

MIN MAX

UP

DOWN

> EXIT

SELECT WITH SERVICE BUTTON AND

PRESS TEST BUTTON

Ec. BRAKE ASSIGNMENTS

Check the '0' for a position on the screen. If it is not on the Å» marks above the MIN and MAX, press the service button to move the > mark to the UP or DOWN, and press the test button so that the '0' is positioned just on the Å» marks.

After testing, select the EXIT and press the test button. The INPUT ASSIGNMENTS screen reappears.

This screen enables to set the volume value of the brake pedal. The MIN indicates the volume value when the pedal is not stepped on and the MAX when stepped on.

Reset the volume value on this screen when the operability of the brake pedal is undesirable. Also newly set the volume value on this screen whenever you have adjusted or replaced the volume.

BRAKE ASSIGNMENTS

(MIN -40 : MAX 40 : DEFAULT 0) BRAKE = 0

0

^ ^

MIN MAX

UP

DOWN

> EXIT

SELECT WITH SERVICE BUTTON AND

PRESS TEST BUTTON

Check the '0' for a position on the screen. If it is not on the < marks above the MIN and MAX, press the service button to move the > mark to the UP or DOWN, and press the test button so that the '0' is positioned just on the < marks.

After testing, select the EXIT and press the test button. The INPUT ASSIGNMENTS screen reappears.

47

Page 54
Image 54
Sega 999-1108 owner manual GAS Assignments