E. INPUT ASSIGNMENTS

Press the service button to select the INPUT ASSIGNMENTS item in the GAME TEST MENU screen, and press the test button. The following INPUT ASSIGNMENTS screen appears to select the input device.

INPUT ASSIGNMENTS

STEERING

0

(DEFAULT = 0)

 

GAS PEDAL

0

(DEFAULT = 0)

 

BRAKE PEDAL

0

(DEFAULT = 0)

 

DEFAULT SETTING

> EXIT

SELECT WITH SERVICE BUTTON

AND

PRESS TEST BUTTON

Press the service button to move the > mark to a targeted input device to select, and press the test button. Then the assignments screen of the selected input device appears.

Selecting the DEFAULT SETTING recovers to the standard factory settings.

After testing, select the EXIT and press the test button. The GAME TEST MENU screen reappears.

Ea. STEER ASSIGNMENTS

This screen enables to set the volume value of the steering wheel (handle). In other words, this screen sets the volume value of the steering wheel's center position (for a straight-ahead direction).

Reset the volume value on this screen when the operability of the steering wheel is undesirable. Also newly set the volume value on this screen whenever you have adjusted or replaced the volume.

STEER ASSIGNMENTS

(MIN -40 : MAX 40 : DEFAULT 0) STEERING = -10

0

^

CENTER

RIGHT

LEFT

> EXIT

SELECT WITH SERVICE BUTTON AND

PRESS TEST BUTTON

First fix the steering wheel to a center position (for a straight-ahead direction). Check the '0' for a position on the screen. If it is not on the ( mark above the CENTER, press the service button to move the > mark to the RIGHT or LEFT, and press the test button so that the '0' is positioned just on the ( mark.

After testing, select the EXIT and press the test button. The INPUT ASSIGNMENTS screen reappears.

46

Page 53
Image 53
Sega 999-1108 owner manual Input Assignments