V.R.
5After replacing the Volume, engage the gears at the angular position shown and fix the VR Bracket.
VR BASE
SCREW (2)
M4 X 12, w/flat & spring washers
FIG. 9. 1 b
6Turn on power.
7Set the Center Value of the Volume in the TEST mode.
8In the TEST mode, check to see if the Volume Value varies smoothly in accordance with the steering wheel operation.
9 - 2 GREASING
STOP
IMPORTANT
Be sure to use the designated grease. Using undesignated grease can cause parts damage.
Do not apply greasing to undesignated places. Failure to observe this can cause malfunctioning or quality deterioration of parts.
VOLUME GEAR MESH PORTION
Apply greasing to gear mesh portions once every 3 months. Use GREASE MATE (SEGA PART NO.
PHOTO 9. 2
56