PROGRAM | Selects one of the available configurations (P1, P2, P3 and P4 or a configuration | ||||
| couple P1/P3 or P2/P4) if the PROGRAM LOCKED parameter is not enabled. | ||||
| This key is active, when the printer is offline or when the printer is online and no | ||||
| print data are in the buffer. | ||||
| When pressed while powering the printer on, selects the offset adjustment page. | ||||
| See “ | Offset Adjustment | ” later in this manual. | ||
|
| ||||
ON LINE | Toggles the printer between online and offline status. | ||||
| When pressed while powering the printer on, selects the Self Test printout. See | ||||
| “ | Printing a Test Page | ” in this manual. | ||
|
|
|
|
|
|
Display
The display normally shows the printer name or is used to indicate fault states of the printer.
20
