Seiko Group FB300 Security Mode, Auto GAP Offset, GET Edge Quote, Skip Perforation, Tear Adjust

Setup Parameter	Values	Description
SECURITY MODE	enabled, disabled	Enables or disables the security actions that assure protection
		against paper jams. If disabled, the paper handling is faster.
AUTO GAP OFFSET	-0,075 mm, -0.050 mm,	Sets the automatic gap offset to one of the given values.
	-0.025 mm, +0.000 mm,
	+0.025 mm, +0.050 mm,
	+0.075 mm, +0.100 mm
GET EDGE QUOTE	0/2”, 1/2”, 2/2”, 3/2”, 4/2”,	Sets the position in which the left paper edge is checked. If set
	5/2”, 6/2”, 7/2”	to 0, the check is performed at the first line. The other values
		correspond to the physical distance from the first line.
SKIP PERFORATION	disabled, enabled	If the movement of the paper perforation under the print head
		is critical, select enabled to avoid the paper to get torn. The
		print head lifts up while the paper perforation passes through.
		If disabled, the print head stays in position.
TEAR ADJUST	-0,85 mm, -0,56 mm,	Sets the paper tear-off position by aligning the paper with the
	-0,28 mm, +0,00 mm,	tear-off edge.
	+0,28 mm +0,56 mm,
	+0,85 mm

35