Seiko Group FB300 Line Mode LF=LF, CR=CR, Lf=Lf+Cr, Lf&Cr=Lf+Cr, Wrap Mode, Slashed Zero

Setup Parameter	Values	Description
LINE MODE	LF=LF, CR=CR	If the printer receives a LF code (LF), it only performs a line feed. If
		the printer receives a CR code (CR), it only performs a carriage
		return.
	CR=LF+CR	If the printer receives a CR code (CR), it performs a carriage return
		followed by a line feed. If the printer receives a LF code (LF), it
		performs a line feed.
	LF=LF+CR	If the printer receives a LF code (LF), it performs a line feed followed
		by a carriage return. If the printer receives a CR code (CR), it only
		performs a carriage return.
	LF&CR=LF+CR	If the printer receives a LF code (LF) or a CR code (CR), it performs
		both a line feed and a carriage return.
WRAP MODE	truncate, autowrap	The data exceeding the line length are truncated (truncate) or
		printed on the following line (autowrap).
SLASHED ZERO	no, yes	Selects the printing character for zero, with a slash (yes) or without
		(no).
PRINT DIRECTION	unidir., bidir.,	Selects the printing direction of the print head: unidirectional
	sw control	(unidir.), bidirectional (bidir.) or selected via software (sw
		control).
EJECT ON FF	no, yes	Performs a form feed according to the selected page format (no) or
		ejects a cut sheet loaded into the printer (yes).
CUT SHEET EJECT	on front, on rear	Selects whether the cut sheet loaded into the printer is ejected
		towards the front or the rear of the printer. The selection of the paper
		ejection towards the rear of the printer should be selected only for
		paper with a length of at least 14 cm (5,5 inch).
		40