Seiko Group FB300 manual Filling in the Printer Setup Forms, Reading the Preprinted Forms

Filling in the Printer Setup Forms

To change the values of the parameters, fill in the marker ( ) beside the value you want to set with a black or blue ball-point pen or a fiber-pen.

Do not use pencils.

AU TO FEED SIGNAL	( )	( )
	disabled *	enabled
SLCT-IN SIGNAL	( )	( )
	disabled *	enabled
BU FFER CONTR OL	( )	( )	( )
	DTR	XO N/XO FF* X ON/X OF F +

If more than one value is set for a parameter, the printer ignores these parameters and maintains

the currently set value.

Do not fill in the marker beside the title of the preprinted form, otherwise the printer will not be

able to read that page.

Reading the Preprinted Forms

When the Printer Setup Forms have been filled in, insert them back into the printer. The printer is able to recognize the Setup Forms by means of the markers on these pages. The printer reads the values marked for the various parameters and configures the printer accordingly.

The settings are confirmed by a # symbol printed on the left of the corresponding marker.

31