Printer Setup
The default configuration of this printer matches most of the commonly used environments, but it may be necessary to change some printer parameters. For this purpose it is necessary to use preprinted forms to be used with the printer in configuration mode.
The following is the complete description of the Setup Procedure.
The detailed description of the parameters that can be set on the various preprinted forms are
described in the “Setup Parameters
” paragraph, later in this manual.
To enter the Printer Setup Mode press and hold the LQ key for at least 1 second while powering the printer on. The printer enters the Setup Mode.
Printing the Printer Setup Forms
If you already have the preprinted forms for the printer setup, go to “Filling in the Printer Setup
Forms
” later in this manual.
Insert a blank sheet in A4 or Letter format. The printer loads the sheet and stops. The P1, P2, P3 and P4 leds are lit.
The ON LINE, PROGRAM and LQ keys are enabled.
If the LQ key is pressed immediately after the printer enters in Setup Mode, all printer setup
modules are printed.
28
