Sennheiser ew500 manual LC display panel, EM 500 receiver

LC display panel

EM 500 receiver

8-step level display for incoming RF signal

8-step level display for incoming AF signal, with “PEAK” warning (this display can alternatively indicate the incoming RF signal from the EM 500’s 2nd receiver section)

6-segment alphanumeric main display

“LOW BATT” warning (indicates transmitter battery status)

Display for the “Frequency” menu. (This display can be the receiver’s standard display which always appears after switch-on).

Display for the “Channel” menu. (This display can be the receiver’s standard display which always appears after switch-on).

Display for the “Name” menu. (This display can be the receiver’s standard display which always appears after switch-on).

Squelch active (“MUTE”)

Diversity display (antenna I or antenna II active)

(“11 Diversity reception”)

EK 500 receiver and SK 500, SKP 500, SKM 500 transmitters

8-step level display for incoming AF signal (EK 500 only)

Alphanumeric main display

3-step display for battery status (SK 500, SKP 500, SKM 500) 8-step level display for incoming RF signal (EK 500 only)

Note:

If the operating steps for adjusting the settings via the menu are similar for all devices, only the main display of the EM 500 receiver is depicted.

71