Battery status indication

The red LED and the lower 8-segment bargraph on the display provide information on the (remaining) battery capacity.

Bargraph:

The bargraph indicates the (remaining) battery capacity in 3 steps:

8 segments:

the full battery capacity is available,

4 segments:

the battery capacity is sufficient,

1 segment:

the battery is going flat,

 

immediately replace the battery.

Note:

When switching on the transmitter with a partially used battery, it is possible that all eight segments may show for a short period of time – if this happens, re-check battery status after a few moments.

LED lit up:

The transmitter is switched on and the battery capacity is sufficient.

LED flashing:

The battery is going flat! You should immediately replace the battery!

66

Page 69
Image 69
Sennheiser ew500 manual Battery status indication