Sennheiser ew500 manual Operation, Operating controls

6Operation

ON/OFF POWER

MUTE

SET

Transmitters and receivers of the Sennheiser evolution wireless series ew 500 have been factory-preset to allow immediate use after switch-on ( “5 Pre- paring the devices for use”). Please note, however, that the transmitter sensitivity is dependent on the application. To avoid overmodulation and distortion, please first check whether the preset sensitivity is suitable for your particular application ( “Adjusting the sensitivity”).

Operating controls

Press the ON/OFF button or the POWER button (EM 500 receiver only) to switch the transmitters and receivers on or off.

Use the MUTE switch (transmitters only) to noiselessly mute the audio signal without switching off the transmitter.

Press the SET button

–to select a menu,

–to change to the next menu,

–to change to the next segment when entering a name,

–to return to the top menu level.

Press the UP button

–to adjust the setting of a menu,

–to change a single character when entering a name.

Press the DOWN button

–to adjust the setting of a menu,

–to change a single character when entering a name.

70