Sennheiser ew500 manual Limiting the volume at the headphone output EK 500 only

BARS	Selecting the function of the bargraph displays (EM 500 only)
	Generally, the EM 500’s two bargraph displays are programmed such that
	the upper bargraph indicates the RF level, while the AF level is indicated by
	the lower bar. You can, however, program the bargraph displays so that they
	indicate the RF levels of the two receiver sections.

￿Select the “BARS” menu by pressing the SET button until “BARS” appears on the display; after a short pause the current setting is displayed.

￿	With the / buttons you can now change the function of the bargraph
	displays:

:RF level of both receiver sections –

“RF I/II” appears on the alphanumeric main display

:RF and AF level –

“RF/AF” appears on the alphanumeric main display

￿Press the SET button to return to the top menu level.

If the bargraphs indicate the RF levels of the two receiver sections, the displays RF, I and II on the left of the bargraphs light up.

If the bargraphs indicate the RF and AF level, the displays RF and AF on the left of the bargraphs light up.

The display then switches back to the standard display.

Ltd	Limiting the volume at the headphone output (EK 500 only)
	In the “Ltd” menu, you can choose the standard volume at the EK 500’s
	headphone output. With the limiter switched on, the maximum volume at
	the headphone output will be reduced by approx. 15 dB.
	￿	Select the “Ltd” menu by pressing the SET button until “Ltd” appears
		on the display; after a short pause the current setting is displayed.
	￿	Press the button to switch the limiter on – if you press the button,
		the limiter is switched off. The new setting – i.e. “Ltd on” or “Ltd OFF”
		– starts flashing on the display.
	￿	Press the SET button to return to the top menu level. The display
		then switches back to the standard display.

Note:

The limiter setting has no effect on the LINE output.

78