Sennheiser ew500 Configuring a frequency memory, Setting the transmission/receiving frequency

TUNE tune

Configuring a frequency memory

Transmitters and receivers of the Sennheiser evolution wireless series ew 500 have 16 switchable frequency memories (presets) respectively to store up to 16 transmission/receiving frequencies with their respective channel numbers (from 0 to 255). With the EM 500 receiver, each frequency memory can additionally be assigned a name.

You can directly switch between the fixed frequency memories (presets)

(“Selecting a frequency memory – selecting the frequency, channel number, name (EM 500 only)”).

Setting the transmission/receiving frequency

Transmission and receiving frequencies are tunable in 25-kHz steps within a switching bandwidth of 32 MHz max.

Special notes on multi-channel operation:

Several devices of the Sennheiser evolution wireless series ew 500 can be used simultaneously on different frequencies. The factory-preset frequencies are intermodulation-free. Before you program new frequency combinations, please refer to the information on the correct frequency choice given in the planning brochure “Practical Applications in RF Technology” which your local Sennheiser agent has in stock or will be pleased to order for you from Sennheiser.

￿Select the frequency memory for which you wish to set a frequency ( “Selecting a frequency memory”).

￿Select the “TUNE” menu by pressing the SET button until “TUNE” appears on the display; after a short pause the currently set frequency is displayed.

￿	With the / buttons you can now select a different frequency. The
	frequencies are tunable in 25-kHz steps. The new frequency starts
	flashing on the display and becomes effective immediately.

￿Press the SET button to return to the top menu level. The display then switches back to the standard display.

80