Sennheiser ew500 manual Basic functions of the Sennheiser operating menu

Basic functions of the Sennheiser operating menu

A special feature of the Sennheiser evolution wireless series ew 500 is the similar operation of transmitters and receivers. In stressfull situations, for example on stage or during a live show or presentation, it is important that the devices are easy to operate and that adjustments to the settings can be made quickly and “without looking”. Therefore, the necessary operating steps for each device are similar.

Important:

With the / buttons you can directly switch between the factory- preset fixed frequency memories (presets). The display starts flashing. Your selection becomes effective immediately.

Press the SET button to enter the top menu level:

By briefly pressing SET again, you can change to the next menu. After approx. one second, the selected menu appears on the display and then the current setting of the menu is indicated.

Press the / buttons to adjust the settings of the selected menu:

The new setting starts flashing on the display. If you return to the previous setting, the flashing stops.

Important:

New settings become effective immediately and will be re- tained in memory on switch-off!

N.B.: When changing transmitter frequencies, care should be taken to avoid causing interference to other channels/users.

In the “TUNE”, “CH NO” and “NAME” menu, the	/ buttons feature a
“fast search” function. By briefly pressing the /	buttons, the display

jumps either forwards or backwards to the next setting. If you hold down a button, the cycling of the display is continously accelerted. If you release the button and start over again, the cycling of the display restarts at normal speed. The “fast search” function allows you to get fast and easily to your desired setting.

Press the SET button to return to the top menu level:

Have you finished your entries? Press the SET button to return to the top menu level. The display then switches back to the standard setting.

72