Sennheiser ew500 manual Switching the phantom powering on/off SKP 500 only

PHAnto	Switching the phantom powering on/off (SKP 500 only)
	The SKP 500 transmitter can supply condenser microphones with 48 V
	phantom powering (P 48). Please note: Dynamic microphones can be operated
	in phantom powering mode without harm. However, if no condenser
	microphone module is being used, you should switch off the phantom
	powering. With the phantom powering switched on, the operating time of
	the battery will be reduced to approx. 5 hours.
	The phantom powering can be switched on or off via the operating menu:
	￿	Select the “PHAnto” menu by pressing the SET button until “PHAnto”
		appears on the display; after a short pause the current setting is
		displayed.
	￿	Press the button to switch the phantom powering on – if you press
		the button, the phantom powering is switched off. The new setting
		– i.e. “ON” or “OFF” – starts flashing on the display.
	￿	Press the SET button to return to the top menu level. The display
		then switches back to the standard display.

77