Close the paper tray and the side covers | Sharp AR-C160 manual

MISFEED REMOVAL

4	Close the paper tray and the side covers.
	● Confirm that the misfeed display is cleared.

MISFEED HAS OCCURRED.

Misfeed in the transport area, exit area and fusing area

CLEAR	INDICATED AREA.
PRESS	FOR RECOVERY INSTRUCTIONS.

CHAPTER5 COPIER TROUBLE? Misfeed removal

1 Open the front cover.

2	Turn the transport lever to the left.
	● Do not pull out the paper transport in this step.

	3	Check to see if any paper is misfed in the exit area.
Roller rotating knob B	3	● If any paper is misfed, turn roller rotating knob B in the direction
		of the arrow to remove the misfed paper.

NOTE:

Be sure to turn roller rotating knob B only in the direction of the arrow. If the knob is turned in the opposite direction, the copier may malfunction.

5-6

Image 100

Sharp AR-C160 Misfeed in the transport area, exit area and fusing area, Close the paper tray and the side covers

Contents

AR-C160 Easily accessible For Your Records Color Copying with Special Features Color Copy Samples Neg./Pos. Reverse See Multi-page Enlargement See Adjustments for Color Copying Printed photo mode RGB Adjust See Sharpness See Color Balance See Brightness/intensity/contrast See Original Brightness + Intensity + Contrast + Contents Using this Manual Introduction Chapter Installation Requirements Battery Disposal Safety Precautions Power on and OFF Become possible Power on and OFF Power save modesSleep mode Preheat mode Information Function Press the Information key in the standby modeScreen for the information categories will appear How to use the touch panel Using the Touch PanelSelection of function Using the Touch Panel Function setting icons Copy Mode and Print Mode Basic screen of the print mode will appearPrinting documents from the computer Check the operation panel to confirm that the on Line Copy Mode and Print Mode Using the operation panel in the print modeHow to select the paper type for the bypass tray To return to the printer basic screen, press the return key General operation steps for using the scanner Making Copies Auditing Accounts Copy Start key is pressed Sided copies of 1-sided originals Close the document coverUse the 10-key pad to enter the desired number Copies Making Copies Copying from Sided copies from 1-sided originals Copying from the Document GlassPress the Color Copy Start key or Black Copy the reminder of the originals in reverse order When making color copies in the duplex mode or making B/WCopy the originals in reverse order Using the Radf Stream feeding mode Adjust the original guides to the size of the originals Using the RadfSet the originals face up in the document feeder tray Number Originals key or Originals key on the touch panel, then proceed toIf the number of originals is not known, select Press the Color Copy Start Key or Black Copy Start key Adjust the original guides to the size of the originals Sided copies from 2-sided originals Original 2-sided Copies 1-sided REDUCTION/ENLARGEMENT/ZOOM Automatic selectionOptional document feeder tray Select the paper tray with the desired paper size REDUCTION/ENLARGEMENT/ZOOM Manual selection 129% Special Papers manual feed Two-sided copying with bypass tray Automatic Exposure AdjustmentsOriginal image type Exposure Adjustments If TEXT/PRTD. PHOTO, Text or TEXT/PHOTOPress the Exposure key on the touch panel Has been selected in , select Auto or Manual JOB Memory Storing a job program Deleting a stored job program JOB MemoryRecalling a job program Interrupting a Copy RUN Special Functions XY Zoom Press the XY Zoom keyPress the Copy Ratio key on the touch panel Following screen will appear Press the Y key XY ZoomCopy ratio in the vertical Y direction will be highlighted Press the Special Modes key Margin ShiftSpecial Modes screen will appear Select the desired shift amounts using Margin ShiftPress the Margin Shift key on the touch panel Select the shift direction Setting screen for Erase will appear EraseEdge + center erase Press the Erase key on the touch panel Select the desired erase mode Erase on the touch panel. The selected erase mode will beErase Highlighted Dual page Copying Information 4 Press the OK key Dual page CopyingEnsure that the desired tray is selected Centering Bottom direction Press the Centering key on the touch panel CenteringCentering key will be highlighted Press the Transparency Inserts key on the touch PanelTransparency Inserts key will be highlighted Transparency Film with Insert Sheets Infor 4 Press the OK keyLoad transparency film into the bypass tray Key or Black Copy Start key Press the 2-SIDED Copy key and select the desired CoversDuplex selection window Select cover placement CoversNot Press the upper OK key Color Adjustments Color Adjustments menu will appear Color Adjustments Press the RGB Adjust key on the touch panelSelect a color to be adjusted Key to weaken the color Setting screen for Sharpness will appear Press the Sharpness key on the touch panel Press the upper OK key.SPECIALFUNCTIONS Coloradjustments Setting screen for Suppress Background will appear Press the Suppress Background key on the touch Use the and + keys to select the desired background Suppression levelLevel Color Balance Press the Color Balance key on the touch panel Color balance settings Brightness /INTENSITY /CONTRAST Use the and + keys to adjust the level of the selected item Select the desired item to be adjustedSelect BRIGHTNESS, Intensity or Contrast on the touch panel Press the Image Edit key on the touch panel Image Editing FunctionsImage Edit menu will appear Image Editing Functions Press the Single Color key on the touch panelSelect the desired color Selected color key will be highlighted Press the Image Edit key on the touch panel Press the NEG./POS. Reverse key on the touchMode, the black and white areas will be reversed Relation to the NEG./POS. Reverse Reverse C D Press the Mirror Image key on the touch panel Mirror Image key will be highlighted Place the original on the document glass Place 2 ½ x 4 and 2 ½ x 2 ½ originals as shown below Setting screen for Photo Repeat will appear Select the desired repeat type To 100% when this function is selected 11 x 17 FULL-BLEEDOriginal will be copied onto 12 x 18 size copy paper Optional document feeder cannot be used with this function Press the 11 x 17 FULL-BLEED key on the touch panel 11 x 17 FULL-BLEED key will be highlighted Setting screen for MULTI-PAGE Enlargement will appear Press the MULTI-PAGE Enlargement key on Touch panelSelect the desired enlargement size Panel Cancel OK Original Size & Orientation Select the original size Setting screen for Image Edit selections will appear Either one or both can be set Adjust the original size on the Original Size tab Press the Extra Size key on the touch panel Press the Auto Image key on the touch panel Press the upper OK key on the touch panelRefer to page 2-11 for the Auto Image function Supplies Paper Types and sizes of copy paperLoading copy paper For best results, use only Sharp recommended paper Paper Loading paper in the paper traysPush the paper tray firmly back into the copier Tray holds 500 sheets of 20 lb. bond paper Changing the copy paper size in the tray Adding Toner Open the front cover Left example shows the toner hopper of black toner Adding TonerIt will take about 40 seconds for the cartridge to empty Supplies Adding toner Used Toner Disposal Disengage and remove the container from the copierOpen the toner collecting container cover Push once on the door to unlatch and open it Storage of Supplies Proper storageStore the supplies in a location that is Store copy paper in the wrapper and lying flatPage Copier TROUBLE? Misfeed Removal When a misfeed occurs, the copier will stopMisfeed in the optional Radf Misfeed Removal Misfeed in the bypass trayOpen the feeding roller cover and pull the original gently Open the exit roller cover and gently pull the original out Turn the transport lever to the left Do not pull out the paper transport in this step Misfeed in the paper trays Close the front coverOpen the right side covers If the paper cannot be seen from the side, pull out Misfeed in the transport area, exit area and fusing area Open the front cover Turn the transport lever to the leftCheck to see if any paper is misfed in the exit area Close the paper tray and the side covers Gently close the upper right side cover Remove the misfed paper Misfeed in the optional duplex module Push the duplex module back into the copier Slide the paper guide if needed Maintenance Required When the message Ready to COPY. Maintenance Required Toner Collecting Container of Transfer Unit Troubleshooting Self-diagnostic function TroubleshootingExample General Information Part Names and Functions Part Names and Functions Interrupt key and indicator p Color Copy Start key and indicatorBlack Copy Start key and indicator LCD touch panel Custom Settings key Initial settingsInformation key p Sided Copy key User Maintenance Document glass and document cover Contrast of the touch panel can be adjusted as below Contrast Specifications Copier Reversing Automatic Document Feeder optional SpecificationsDuplex Module optional Acoustic Noise Emission measurement according to ISO7779 Printing mode Standby modeEmission Concentration measurement according to RAL UZ62 Optional Equipment System Configuration BIN Staple Sorter AR-SS2 Part Names Using the staple sorter BIN Staple Sorter AR-SS2 Sorter Capacity Using the document glass Staple sort Using the optional Radf Up to 20 sets can be made Manual stapling Set of copies will be stapled Staple cartridge replacement Remove the empty staple cartridge from inside Staple box Remove the rear paper and tape from the cartridge Staple jam removal Return the lever to its original position BIN Staple Sorter AR-SS2 Misfeed removal Copier will stop when a misfeed occursSlide the sorter back toward the copier and latch it into Specifications Paper Weight 13 ~ 28 lbs17 ~ 28 lbs 2 x 11 x 12 x Paper size 2 x Paper weight 15 lbs. to 28 lbs Large Capacity Tray AR-LC2N When the button lamp goes out, pull the paper tray out Large Capacity Tray AR-LC2NFan the copy paper Load the paper onto the feed table Capacity tray Remove any misfed paper from the copier and the large Remove the misfed paper Gently push the tray back into place Finisher AR-FN4 Offset mode NON Offset modeFinisher AR-FN4 Offset stack Staple print Printed output will be stapled When the staple cartridge is empty, the message Slide Replace the staple as follows FinisherAR-FN4 Staple jam removal Finisher AR-FN4 Misfeed removal Finisher AR-FN4 Page Page Sharp Corporation