Sharp AR-C160 operation manual Press the Extra Size key on the touch panel

IMAGE EDITING FUNCTIONS

READY TO COPY.			Press the “EXTRA SIZE” key on the touch panel.
			4 ● The setting screen for EXTRA SIZE will appear.
SPECIAL MODES		OK
IMAGE EDIT		OK	● If an original on the document glass or paper in the bypass tray
			is set on opening the EXTRA SIZE screen, the original and paper
SINGLE COLOR	NEG./POS.	MIRROR
			dimensions in X (horizontal) and Y (vertical) will be shown
	REVERSE	IMAGE
PHOTO REPEAT	11 17	MULTI-PAGE	respectively on the ORIGINAL SIZE tab and the PAPER SIZE
	FULL-BLEED	ENLARGEMENT	FOR BYPASS tab.
EXTRA SIZE
			As a starting point, the dimensions shown for extra size originals
			or paper will be the closest match to standard sizes.

READY TO COPY.

OK

EXTRA SIZE CANCEL OK

X12 1/ (5 1/2~17)

4 inch

	Y	4	(4~11 3/4)
			inch
	ENABLE AUTO SIZE DETECTION
			PAPER SIZE FOR BYPASS
	ORIGINAL SIZE
READY TO COPY.
				OK
EXTRA SIZE			CANCEL	OK
	X		(5 1/2~17)
			inch
	Y		(4~11 3/4)
			inch
	ENABLE AUTO SIZE DETECTION
			PAPER SIZE FOR BYPASS
	ORIGINAL SIZE

READY TO COPY.						3CHAPTER
	X	8	1/2	inch(5 1/2~17)	OK
EXTRA SIZE				CANCEL	OK
	Y	5	1/2	inch(4~11 3/4)
						SPECIAL
	ENABLE AUTO SIZE DETECTION
			PAPER SIZE FOR BYPASS
	ORIGINAL SIZE
						FUNCTIONS
EXTRA SIZE				CANCEL	OK
READY TO COPY.
					OK
	X	8	1/2	inch(5 1/2~17)		Image
	Y	5	1/2	inch(4~11 3/4)		editing
	ENABLE AUTO SIZE DETECTION
	ORIGINAL SIZE		PAPER SIZE FOR BYPASS			functions

Adjust the original size on the “ORIGINAL SIZE” tab and

5 paper size on the “PAPER SIZE FOR BYPASS” tab, respectively.

●Adjust each X (horizontal) and Y (vertical) dimension using the

and keys.

●If the “ENABLE AUTO SIZE DETECTION” check box is checked on either tab, the size detection function will be activated. In this

case, the “X/Y” keys and “ / ” keys will be grayed out not to allow any input.

3-39