Printing mode Standby mode | Sharp AR-C160 specs

SPECIFICATIONS

Acoustic Noise Emission (measurement according to ISO7779)

			Printing mode		Standby mode

			Black/White	Color
			Black/White	Color

	Sound power level LwA		6.4B	6.3B	5.2B

	Sound pressure	Bystander positions	50dB(A)	48dB(A)	24dB(A)
	level LpA
	level LpA	Operator position	50dB(A)	49dB(A)	24dB(A)
		Operator position	50dB(A)	49dB(A)	24dB(A)

Emission Concentration (measurement according to RAL UZ62)

Ozone	0.02 mg/m3	or less
Dust	0.075 mg/m3 or less
Styrene	0.07 mg/m3	or less

Specifications are subject to change for improvement without notice.

CHAPTER6
Specifications	GENERAL INFORMATION

6-10

Image 118

Sharp AR-C160 operation manual Acoustic Noise Emission measurement according to ISO7779, Printing mode Standby mode

Contents

AR-C160 Easily accessible For Your Records Color Copying with Special Features Color Copy Samples Neg./Pos. Reverse See Multi-page Enlargement See Adjustments for Color Copying Printed photo mode RGB Adjust See Sharpness See Color Balance See Brightness/intensity/contrast See Original Brightness + Intensity + Contrast + Contents Using this Manual Introduction Chapter Installation Requirements Battery Disposal Safety Precautions Power on and OFF Become possible Sleep mode Power on and OFFPower save modes Preheat mode Information Function Press the Information key in the standby modeScreen for the information categories will appear How to use the touch panel Using the Touch PanelSelection of function Using the Touch Panel Function setting icons Printing documents from the computer Copy Mode and Print ModeBasic screen of the print mode will appear Check the operation panel to confirm that the on Line How to select the paper type for the bypass tray Copy Mode and Print ModeUsing the operation panel in the print mode To return to the printer basic screen, press the return key General operation steps for using the scanner Making Copies Auditing Accounts Copy Start key is pressed Use the 10-key pad to enter the desired number Copies Sided copies of 1-sided originalsClose the document cover Making Copies Copying from Sided copies from 1-sided originals Copying from the Document GlassPress the Color Copy Start key or Black Copy the reminder of the originals in reverse order When making color copies in the duplex mode or making B/WCopy the originals in reverse order Using the Radf Stream feeding mode Adjust the original guides to the size of the originals Using the RadfSet the originals face up in the document feeder tray If the number of originals is not known, select Number Originals key orOriginals key on the touch panel, then proceed to Press the Color Copy Start Key or Black Copy Start key Adjust the original guides to the size of the originals Sided copies from 2-sided originals Original 2-sided Copies 1-sided Optional document feeder tray REDUCTION/ENLARGEMENT/ZOOMAutomatic selection Select the paper tray with the desired paper size REDUCTION/ENLARGEMENT/ZOOM Manual selection 129% Special Papers manual feed Two-sided copying with bypass tray Automatic Exposure AdjustmentsOriginal image type Press the Exposure key on the touch panel Exposure AdjustmentsIf TEXT/PRTD. PHOTO, Text or TEXT/PHOTO Has been selected in , select Auto or Manual JOB Memory Storing a job program Deleting a stored job program JOB MemoryRecalling a job program Interrupting a Copy RUN Special Functions Press the Copy Ratio key on the touch panel XY ZoomPress the XY Zoom key Following screen will appear Press the Y key XY ZoomCopy ratio in the vertical Y direction will be highlighted Press the Special Modes key Margin ShiftSpecial Modes screen will appear Press the Margin Shift key on the touch panel Select the desired shift amounts usingMargin Shift Select the shift direction Edge + center erase Setting screen for Erase will appearErase Press the Erase key on the touch panel Erase Select the desired erase modeErase on the touch panel. The selected erase mode will be Highlighted Dual page Copying Information 4 Press the OK key Dual page CopyingEnsure that the desired tray is selected Centering Bottom direction Press the Centering key on the touch panel CenteringCentering key will be highlighted Press the Transparency Inserts key on the touch PanelTransparency Inserts key will be highlighted Load transparency film into the bypass tray Transparency Film with Insert SheetsInfor 4 Press the OK key Key or Black Copy Start key Press the 2-SIDED Copy key and select the desired CoversDuplex selection window Not Select cover placementCovers Press the upper OK key Color Adjustments Color Adjustments menu will appear Select a color to be adjusted Color AdjustmentsPress the RGB Adjust key on the touch panel Key to weaken the color Setting screen for Sharpness will appear Press the Sharpness key on the touch panel Press the upper OK key.SPECIALFUNCTIONS Coloradjustments Setting screen for Suppress Background will appear Press the Suppress Background key on the touch Use the and + keys to select the desired background Suppression levelLevel Color Balance Press the Color Balance key on the touch panel Color balance settings Brightness /INTENSITY /CONTRAST Use the and + keys to adjust the level of the selected item Select the desired item to be adjustedSelect BRIGHTNESS, Intensity or Contrast on the touch panel Press the Image Edit key on the touch panel Image Editing FunctionsImage Edit menu will appear Select the desired color Image Editing FunctionsPress the Single Color key on the touch panel Selected color key will be highlighted Mode, the black and white areas will be reversed Press the Image Edit key on the touch panelPress the NEG./POS. Reverse key on the touch Relation to the NEG./POS. Reverse Reverse C D Press the Mirror Image key on the touch panel Mirror Image key will be highlighted Place the original on the document glass Place 2 ½ x 4 and 2 ½ x 2 ½ originals as shown below Setting screen for Photo Repeat will appear Select the desired repeat type Original will be copied onto 12 x 18 size copy paper To 100% when this function is selected11 x 17 FULL-BLEED Optional document feeder cannot be used with this function Press the 11 x 17 FULL-BLEED key on the touch panel 11 x 17 FULL-BLEED key will be highlighted Select the desired enlargement size Setting screen for MULTI-PAGE Enlargement will appearPress the MULTI-PAGE Enlargement key on Touch panel Panel Cancel OK Original Size & Orientation Select the original size Setting screen for Image Edit selections will appear Either one or both can be set Adjust the original size on the Original Size tab Press the Extra Size key on the touch panel Press the Auto Image key on the touch panel Press the upper OK key on the touch panelRefer to page 2-11 for the Auto Image function Supplies Loading copy paper PaperTypes and sizes of copy paper For best results, use only Sharp recommended paper Push the paper tray firmly back into the copier PaperLoading paper in the paper trays Tray holds 500 sheets of 20 lb. bond paper Changing the copy paper size in the tray Adding Toner Open the front cover Left example shows the toner hopper of black toner Adding TonerIt will take about 40 seconds for the cartridge to empty Supplies Adding toner Open the toner collecting container cover Used Toner DisposalDisengage and remove the container from the copier Push once on the door to unlatch and open it Store the supplies in a location that is Storage of SuppliesProper storage Store copy paper in the wrapper and lying flatPage Copier TROUBLE? Misfeed Removal When a misfeed occurs, the copier will stopMisfeed in the optional Radf Open the feeding roller cover and pull the original gently Misfeed RemovalMisfeed in the bypass tray Open the exit roller cover and gently pull the original out Turn the transport lever to the left Do not pull out the paper transport in this step Open the right side covers Misfeed in the paper traysClose the front cover If the paper cannot be seen from the side, pull out Check to see if any paper is misfed in the exit area Misfeed in the transport area, exit area and fusing areaOpen the front cover Turn the transport lever to the left Close the paper tray and the side covers Gently close the upper right side cover Remove the misfed paper Misfeed in the optional duplex module Push the duplex module back into the copier Slide the paper guide if needed Maintenance Required When the message Ready to COPY. Maintenance Required Toner Collecting Container of Transfer Unit Troubleshooting Self-diagnostic function TroubleshootingExample General Information Part Names and Functions Part Names and Functions Black Copy Start key and indicator Interrupt key and indicator pColor Copy Start key and indicator LCD touch panel Information key p Custom Settings keyInitial settings Sided Copy key User Maintenance Document glass and document cover Contrast of the touch panel can be adjusted as below Contrast Specifications Copier Reversing Automatic Document Feeder optional SpecificationsDuplex Module optional Acoustic Noise Emission measurement according to ISO7779 Printing mode Standby modeEmission Concentration measurement according to RAL UZ62 Optional Equipment System Configuration BIN Staple Sorter AR-SS2 Part Names Using the staple sorter BIN Staple Sorter AR-SS2 Sorter Capacity Using the document glass Staple sort Using the optional Radf Up to 20 sets can be made Manual stapling Set of copies will be stapled Staple cartridge replacement Remove the empty staple cartridge from inside Staple box Remove the rear paper and tape from the cartridge Staple jam removal Return the lever to its original position BIN Staple Sorter AR-SS2 Misfeed removal Copier will stop when a misfeed occursSlide the sorter back toward the copier and latch it into 17 ~ 28 lbs 2 x SpecificationsPaper Weight 13 ~ 28 lbs 11 x 12 x Paper size 2 x Paper weight 15 lbs. to 28 lbs Large Capacity Tray AR-LC2N Fan the copy paper When the button lamp goes out, pull the paper tray outLarge Capacity Tray AR-LC2N Load the paper onto the feed table Capacity tray Remove any misfed paper from the copier and the large Remove the misfed paper Gently push the tray back into place Finisher AR-FN4 Finisher AR-FN4 Offset modeNON Offset mode Offset stack Staple print Printed output will be stapled When the staple cartridge is empty, the message Slide Replace the staple as follows FinisherAR-FN4 Staple jam removal Finisher AR-FN4 Misfeed removal Finisher AR-FN4 Page Page Sharp Corporation