Sharp AR-C160 Number Originals key or, Originals key on the touch panel, then proceed to

USING THE RADF

2-sided copies from 1-sided originals

Originals (1-sided) Copy (2-sided)

To copy in the 1-sided to 2-sided copy mode, an optional duplex module (AR-DU2N) must be installed.

2CHAPTER			Maximum height
			line
MAKING COPIES		2-SIDED
Using the
		COPY
		OUTPUT
RADF
				AUTO
READY TO COPY.(DOCUMENT FEEDER MODE)
2-SIDED COPY				OK
				PRE-COUNT
EVEN NUMBER		ODD NUMBER
ORIGINALS		ORIGINALS
AUTO		AUTO	1	100%
			8/2 11
EXPOSURE		PAPER SELECT		COPY RATIO
READY TO COPY.(DOCUMENT FEEDER MODE)
2-SIDED COPY				OK
				PRE-COUNT
		EVEN
EVEN NUMBER		ODD NUMBER
ORIGINALS		ORIGINALS
AUTO		AUTO	1	100%
			8/2 11
EXPOSURE		PAPER SELECT		COPY RATIO
1	2	INTE
		3INTERRUPT
4	5	6	CLE
		CLEAR
			CA
		ALL	AL
7	8	9
AUDIT		PROGRAMC	C

0P CLEAR CL

2-8

Adjust the original guides to the size of the originals and

1 set the originals face up in the document feeder tray.

2 Press the 2-SIDED COPY key.

3	If the number of originals is known, use the		(EVEN
	NUMBER ORIGINALS) key or	(ODD NUMBER
	ORIGINALS) key on the touch panel, then proceed to
	step 4. If the number of originals is not known, select
	“PRE-COUNT” for an automatic count by the RADF and
	press the COLOR COPY START (	) key or BLACK
	COPY START ( ) key.
	● The following message will appear.
	PRE-COUNT MODE
	NUMBER OF ORIGINALS IS **.
	● If the number of originals exceeds the limit, other messages will
	appear .
	● When the count is complete and the number is known, replace
	the originals in the document feeder tray and select “EVEN
	NUMBER ORIGINALS” or “ODD NUMBER ORIGINALS” as
	above.
4 Press the “OK” key.
5	Enter the desired number of copies.
	● When making color copies in the duplex mode or making B/W
	copies in the duplex mode onto paper 8-1/2" x 14" or larger, only
	one copy per original can be made. Even if a multiple number of
	copies is set, the number will be changed to 1 when a START key
	is pressed.

Press the COLOR COPY START () key or BLACK

6 COPY START () key.

●To perform color copying, press the COLOR COPY START

() key. To perform black/white copying, press the BLACK COPY START () key.

●To cancel a copy run during duplex copying, press the CLEAR ALL ( CA ) key.