Select the desired item to be adjusted | Sharp AR-C160 guide

COLOR ADJUSTMENTS

READY TO COPY.
SPECIAL MODES			OK
BRIGHT INTENS	CONT	CANCEL	OK
ONLY ONE FUNCTION IS SELECTABLE.
BRIGHTNESS	INTENSITY		CONTRAST

BRIGHT INTENS	CONT	CANCEL	OK
ONLY ONE FUNCTION IS SELECTABLE.
BRIGHTNESS	INTENSITY		CONTRAST

5

6

Select the desired item to be adjusted.

●Select “BRIGHTNESS”, “INTENSITY” or “CONTRAST” on the touch panel.

Use the “-” and “+” keys to adjust the level of the selected item.

CHAPTER3

READY TO COPY.
			OK
BRIGHT INTENS	CONT	CANCEL	OK
ONLY ONE FUNCTION IS SELECTABLE.
BRIGHTNESS	INTENSITY		CONTRAST

7 Press the upper “OK” key.

SPECIAL FUNCTIONS Color adjustments

N

1 2 3 INTERRUPT

4 5 6

CLEAR CA

ALL

7 8 9

AUDIT

PROGRAM

C

0 P CLEAR

3 INTERRUPT

6

CLEAR CA

ALL

9

PROGRAM C

P CLEAR

8

9

Make all other desired copier selections and enter the desired number of copies.

Press the COLOR COPY START ( ) key.

●The BLACK COPY START () key can be pressed for copying. However, the BRIGHTNESS/INTENSITY/CONTRAST setting will be ignored.

●To cancel the BRIGHTNESS/INTENSITY/CONTRAST function, select the BRIGHTNESS/INTENSITY/CONTRAST function again and press the “CANCEL” key.

3-25

Image 69

Sharp AR-C160 Select the desired item to be adjusted, Use the and + keys to adjust the level of the selected item

Contents

AR-C160 For Your Records Easily accessible Color Copy Samples Color Copying with Special Features Neg./Pos. Reverse See Multi-page Enlargement See Printed photo mode Adjustments for Color Copying RGB Adjust See Sharpness See Color Balance See Original Brightness + Intensity + Contrast + Brightness/intensity/contrast See Contents Introduction Using this Manual Chapter Installation Requirements Battery Disposal Safety Precautions Become possible Power on and OFF Power save modes Power on and OFFSleep mode Preheat mode Press the Information key in the standby mode Information FunctionScreen for the information categories will appear Using the Touch Panel How to use the touch panelSelection of function Function setting icons Using the Touch Panel Basic screen of the print mode will appear Copy Mode and Print ModePrinting documents from the computer Check the operation panel to confirm that the on Line Using the operation panel in the print mode Copy Mode and Print ModeHow to select the paper type for the bypass tray To return to the printer basic screen, press the return key General operation steps for using the scanner Making Copies Copy Start key is pressed Auditing Accounts Close the document cover Sided copies of 1-sided originalsUse the 10-key pad to enter the desired number Copies Making Copies Copying from Copying from the Document Glass Sided copies from 1-sided originalsPress the Color Copy Start key or Black When making color copies in the duplex mode or making B/W Copy the reminder of the originals in reverse orderCopy the originals in reverse order Stream feeding mode Using the Radf Using the Radf Adjust the original guides to the size of the originalsSet the originals face up in the document feeder tray Originals key on the touch panel, then proceed to Number Originals key orIf the number of originals is not known, select Press the Color Copy Start Key or Black Copy Start key Sided copies from 2-sided originals Adjust the original guides to the size of the originals Original 2-sided Copies 1-sided Automatic selection REDUCTION/ENLARGEMENT/ZOOMOptional document feeder tray Select the paper tray with the desired paper size Manual selection REDUCTION/ENLARGEMENT/ZOOM 129% Special Papers manual feed Two-sided copying with bypass tray Exposure Adjustments AutomaticOriginal image type If TEXT/PRTD. PHOTO, Text or TEXT/PHOTO Exposure AdjustmentsPress the Exposure key on the touch panel Has been selected in , select Auto or Manual Storing a job program JOB Memory JOB Memory Deleting a stored job programRecalling a job program Interrupting a Copy RUN Special Functions Press the XY Zoom key XY ZoomPress the Copy Ratio key on the touch panel Following screen will appear XY Zoom Press the Y keyCopy ratio in the vertical Y direction will be highlighted Margin Shift Press the Special Modes keySpecial Modes screen will appear Margin Shift Select the desired shift amounts usingPress the Margin Shift key on the touch panel Select the shift direction Erase Setting screen for Erase will appearEdge + center erase Press the Erase key on the touch panel Erase on the touch panel. The selected erase mode will be Select the desired erase modeErase Highlighted Dual page Copying Dual page Copying Information 4 Press the OK keyEnsure that the desired tray is selected Bottom direction Centering Centering Press the Centering key on the touch panelCentering key will be highlighted Panel Press the Transparency Inserts key on the touchTransparency Inserts key will be highlighted Infor 4 Press the OK key Transparency Film with Insert SheetsLoad transparency film into the bypass tray Key or Black Copy Start key Covers Press the 2-SIDED Copy key and select the desiredDuplex selection window Covers Select cover placementNot Press the upper OK key Color Adjustments menu will appear Color Adjustments Press the RGB Adjust key on the touch panel Color AdjustmentsSelect a color to be adjusted Key to weaken the color Press the Sharpness key on the touch panel Setting screen for Sharpness will appear Press the upper OK key.SPECIALFUNCTIONS Coloradjustments Press the Suppress Background key on the touch Setting screen for Suppress Background will appear Suppression level Use the and + keys to select the desired backgroundLevel Press the Color Balance key on the touch panel Color Balance Color balance settings Brightness /INTENSITY /CONTRAST Select the desired item to be adjusted Use the and + keys to adjust the level of the selected itemSelect BRIGHTNESS, Intensity or Contrast on the touch panel Image Editing Functions Press the Image Edit key on the touch panelImage Edit menu will appear Press the Single Color key on the touch panel Image Editing FunctionsSelect the desired color Selected color key will be highlighted Press the NEG./POS. Reverse key on the touch Press the Image Edit key on the touch panelMode, the black and white areas will be reversed Relation to the NEG./POS. Reverse Reverse C D Mirror Image key will be highlighted Press the Mirror Image key on the touch panel Place 2 ½ x 4 and 2 ½ x 2 ½ originals as shown below Place the original on the document glass Select the desired repeat type Setting screen for Photo Repeat will appear 11 x 17 FULL-BLEED To 100% when this function is selectedOriginal will be copied onto 12 x 18 size copy paper Optional document feeder cannot be used with this function 11 x 17 FULL-BLEED key will be highlighted Press the 11 x 17 FULL-BLEED key on the touch panel Press the MULTI-PAGE Enlargement key on Touch panel Setting screen for MULTI-PAGE Enlargement will appearSelect the desired enlargement size Panel Select the original size Cancel OK Original Size & Orientation Either one or both can be set Setting screen for Image Edit selections will appear Press the Extra Size key on the touch panel Adjust the original size on the Original Size tab Press the upper OK key on the touch panel Press the Auto Image key on the touch panelRefer to page 2-11 for the Auto Image function Supplies Types and sizes of copy paper PaperLoading copy paper For best results, use only Sharp recommended paper Loading paper in the paper trays PaperPush the paper tray firmly back into the copier Tray holds 500 sheets of 20 lb. bond paper Changing the copy paper size in the tray Open the front cover Adding Toner Adding Toner Left example shows the toner hopper of black tonerIt will take about 40 seconds for the cartridge to empty Supplies Adding toner Disengage and remove the container from the copier Used Toner DisposalOpen the toner collecting container cover Push once on the door to unlatch and open it Proper storage Storage of SuppliesStore the supplies in a location that is Store copy paper in the wrapper and lying flatPage Copier TROUBLE? When a misfeed occurs, the copier will stop Misfeed RemovalMisfeed in the optional Radf Misfeed in the bypass tray Misfeed RemovalOpen the feeding roller cover and pull the original gently Open the exit roller cover and gently pull the original out Do not pull out the paper transport in this step Turn the transport lever to the left Close the front cover Misfeed in the paper traysOpen the right side covers If the paper cannot be seen from the side, pull out Open the front cover Turn the transport lever to the left Misfeed in the transport area, exit area and fusing areaCheck to see if any paper is misfed in the exit area Close the paper tray and the side covers Gently close the upper right side cover Remove the misfed paper Misfeed in the optional duplex module Slide the paper guide if needed Push the duplex module back into the copier When the message Ready to COPY. Maintenance Required Maintenance Required Toner Collecting Container of Transfer Unit Troubleshooting Troubleshooting Self-diagnostic functionExample General Information Part Names and Functions Part Names and Functions Color Copy Start key and indicator Interrupt key and indicator pBlack Copy Start key and indicator LCD touch panel Initial settings Custom Settings keyInformation key p Sided Copy key Document glass and document cover User Maintenance Contrast Contrast of the touch panel can be adjusted as below Copier Specifications Specifications Reversing Automatic Document Feeder optionalDuplex Module optional Printing mode Standby mode Acoustic Noise Emission measurement according to ISO7779Emission Concentration measurement according to RAL UZ62 Optional Equipment System Configuration Part Names BIN Staple Sorter AR-SS2 BIN Staple Sorter AR-SS2 Using the staple sorter Sorter Capacity Staple sort Using the document glass Up to 20 sets can be made Using the optional Radf Set of copies will be stapled Manual stapling Remove the empty staple cartridge from inside Staple box Staple cartridge replacement Remove the rear paper and tape from the cartridge Return the lever to its original position Staple jam removal BIN Staple Sorter AR-SS2 Copier will stop when a misfeed occurs Misfeed removalSlide the sorter back toward the copier and latch it into Paper Weight 13 ~ 28 lbs Specifications17 ~ 28 lbs 2 x 11 x 12 x Large Capacity Tray AR-LC2N Paper size 2 x Paper weight 15 lbs. to 28 lbs Large Capacity Tray AR-LC2N When the button lamp goes out, pull the paper tray outFan the copy paper Load the paper onto the feed table Remove any misfed paper from the copier and the large Capacity tray Remove the misfed paper Gently push the tray back into place Finisher AR-FN4 NON Offset mode Offset modeFinisher AR-FN4 Offset stack Printed output will be stapled Staple print Replace the staple as follows When the staple cartridge is empty, the message Slide FinisherAR-FN4 Staple jam removal Finisher AR-FN4 Misfeed removal Finisher AR-FN4 Page Page Sharp Corporation