Manuals / Sharp / Computer Equipment / Copier

Sharp AR-C160 operation manual Brightness /INTENSITY /CONTRAST

Models: AR-C160

1 148

Download 148 pages 6.18 Kb

Page 68

COLOR ADJUSTMENTS

BRIGHTNESS /INTENSITY /CONTRAST

This copier allows the level of brightness, intensity or contrast of images to be adjusted. If brightness is selected, color tone can be darkened or lightened. If intensity is selected, color saturation can be made to be more vivid or more dull. If contrast is selected, the contrast between image areas can be made to be higher or lower. (Refer to the samples on page 8 to see the effect on copy images in relation to the BRIGHTNESS /INTENSITY /CONTRAST adjustments.)

CHAPTER3

Place the original on the document glass or in the

1 optional document feeder tray.

SPECIAL FUNCTIONS Color adjustments

		2	Press the SPECIAL MODES key.
SPECIAL	READY TO	2	● The SPECIAL MODES screen will appear.
MODES

2-SIDED

COPY

READY TO COPY.			Press the “COLOR ADJUSTMENTS” key on the touch
READY TO COPY.			3 panel.
SPECIAL MODES		OK	3 panel.
MARGIN SHIFT	ERASE	DUAL PAGE	● The COLOR ADJUSTMENTS menu will appear.
MARGIN SHIFT	ERASE	COPY
		COPY
CENTERING	TRANSPARENCY INSERTS

	COVERS	COLOR			IMAGE EDIT
	COVERS	ADJUSTMENTS			IMAGE EDIT
		ADJUSTMENTS
	AUTO	AUTO	1	11	100%
	AUTO	AUTO	8/2	11	100%
	EXPOSURE	PAPER SELECT			COPY RATIO
	SPECIAL MODES				OK
	COLOR ADJUSTMENTS				OK
	RGB ADJUST	SHARPNESS			SUPPRESS
	RGB ADJUST	SHARPNESS			BACKGROUND
					BACKGROUND

COLOR

BALANCE

BRIGHTNESS INTENSITY CONTRAST

Press the “BRIGHTNESS/INTENSITY/CONTRAST” key

4 on the touch panel.

●The setting screen for BRIGHTNESS/INTENSITY/CONTRAST will appear.

READY TO COPY.

SPECIAL MODES			OK
BRIGHT INTENS	CONT	CANCEL	OK
ONLY ONE FUNCTION IS SELECTABLE.
BRIGHTNESS	INTENSITY		CONTRAST

3-24

Image 68

Sharp AR-C160 operation manual Brightness /INTENSITY /CONTRAST

Contents

AR-C160 Easily accessible For Your Records Color Copying with Special Features Color Copy Samples Neg./Pos. Reverse See Multi-page Enlargement See Adjustments for Color Copying Printed photo mode RGB Adjust See Sharpness See Color Balance See Brightness/intensity/contrast See Original Brightness + Intensity + Contrast + Contents Using this Manual Introduction Chapter Installation Requirements Battery Disposal Safety Precautions Power on and OFF Become possible Power on and OFF Power save modesSleep mode Preheat mode Screen for the information categories will appear Press the Information key in the standby modeInformation Function Selection of function Using the Touch PanelHow to use the touch panel Using the Touch Panel Function setting icons Copy Mode and Print Mode Basic screen of the print mode will appearPrinting documents from the computer Check the operation panel to confirm that the on Line Copy Mode and Print Mode Using the operation panel in the print modeHow to select the paper type for the bypass tray To return to the printer basic screen, press the return key General operation steps for using the scanner Making Copies Auditing Accounts Copy Start key is pressed Sided copies of 1-sided originals Close the document coverUse the 10-key pad to enter the desired number Copies Making Copies Copying from Press the Color Copy Start key or Black Copying from the Document GlassSided copies from 1-sided originals Copy the originals in reverse order When making color copies in the duplex mode or making B/WCopy the reminder of the originals in reverse order Using the Radf Stream feeding mode Set the originals face up in the document feeder tray Using the RadfAdjust the original guides to the size of the originals Number Originals key or Originals key on the touch panel, then proceed toIf the number of originals is not known, select Press the Color Copy Start Key or Black Copy Start key Adjust the original guides to the size of the originals Sided copies from 2-sided originals Original 2-sided Copies 1-sided REDUCTION/ENLARGEMENT/ZOOM Automatic selectionOptional document feeder tray Select the paper tray with the desired paper size REDUCTION/ENLARGEMENT/ZOOM Manual selection 129% Special Papers manual feed Two-sided copying with bypass tray Original image type Exposure AdjustmentsAutomatic Exposure Adjustments If TEXT/PRTD. PHOTO, Text or TEXT/PHOTOPress the Exposure key on the touch panel Has been selected in , select Auto or Manual JOB Memory Storing a job program Recalling a job program JOB MemoryDeleting a stored job program Interrupting a Copy RUN Special Functions XY Zoom Press the XY Zoom keyPress the Copy Ratio key on the touch panel Following screen will appear Copy ratio in the vertical Y direction will be highlighted XY ZoomPress the Y key Special Modes screen will appear Margin ShiftPress the Special Modes key Select the desired shift amounts using Margin ShiftPress the Margin Shift key on the touch panel Select the shift direction Setting screen for Erase will appear EraseEdge + center erase Press the Erase key on the touch panel Select the desired erase mode Erase on the touch panel. The selected erase mode will beErase Highlighted Dual page Copying Ensure that the desired tray is selected Dual page CopyingInformation 4 Press the OK key Centering Bottom direction Centering key will be highlighted CenteringPress the Centering key on the touch panel Transparency Inserts key will be highlighted PanelPress the Transparency Inserts key on the touch Transparency Film with Insert Sheets Infor 4 Press the OK keyLoad transparency film into the bypass tray Key or Black Copy Start key Duplex selection window CoversPress the 2-SIDED Copy key and select the desired Select cover placement CoversNot Press the upper OK key Color Adjustments Color Adjustments menu will appear Color Adjustments Press the RGB Adjust key on the touch panelSelect a color to be adjusted Key to weaken the color Setting screen for Sharpness will appear Press the Sharpness key on the touch panel Press the upper OK key.SPECIALFUNCTIONS Coloradjustments Setting screen for Suppress Background will appear Press the Suppress Background key on the touch Level Suppression levelUse the and + keys to select the desired background Color Balance Press the Color Balance key on the touch panel Color balance settings Brightness /INTENSITY /CONTRAST Select BRIGHTNESS, Intensity or Contrast on the touch panel Select the desired item to be adjustedUse the and + keys to adjust the level of the selected item Image Edit menu will appear Image Editing FunctionsPress the Image Edit key on the touch panel Image Editing Functions Press the Single Color key on the touch panelSelect the desired color Selected color key will be highlighted Press the Image Edit key on the touch panel Press the NEG./POS. Reverse key on the touchMode, the black and white areas will be reversed Relation to the NEG./POS. Reverse Reverse C D Press the Mirror Image key on the touch panel Mirror Image key will be highlighted Place the original on the document glass Place 2 ½ x 4 and 2 ½ x 2 ½ originals as shown below Setting screen for Photo Repeat will appear Select the desired repeat type To 100% when this function is selected 11 x 17 FULL-BLEEDOriginal will be copied onto 12 x 18 size copy paper Optional document feeder cannot be used with this function Press the 11 x 17 FULL-BLEED key on the touch panel 11 x 17 FULL-BLEED key will be highlighted Setting screen for MULTI-PAGE Enlargement will appear Press the MULTI-PAGE Enlargement key on Touch panelSelect the desired enlargement size Panel Cancel OK Original Size & Orientation Select the original size Setting screen for Image Edit selections will appear Either one or both can be set Adjust the original size on the Original Size tab Press the Extra Size key on the touch panel Refer to page 2-11 for the Auto Image function Press the upper OK key on the touch panelPress the Auto Image key on the touch panel Supplies Paper Types and sizes of copy paperLoading copy paper For best results, use only Sharp recommended paper Paper Loading paper in the paper traysPush the paper tray firmly back into the copier Tray holds 500 sheets of 20 lb. bond paper Changing the copy paper size in the tray Adding Toner Open the front cover It will take about 40 seconds for the cartridge to empty Adding TonerLeft example shows the toner hopper of black toner Supplies Adding toner Used Toner Disposal Disengage and remove the container from the copierOpen the toner collecting container cover Push once on the door to unlatch and open it Storage of Supplies Proper storageStore the supplies in a location that is Store copy paper in the wrapper and lying flatPage Copier TROUBLE? Misfeed in the optional Radf When a misfeed occurs, the copier will stopMisfeed Removal Misfeed Removal Misfeed in the bypass trayOpen the feeding roller cover and pull the original gently Open the exit roller cover and gently pull the original out Turn the transport lever to the left Do not pull out the paper transport in this step Misfeed in the paper trays Close the front coverOpen the right side covers If the paper cannot be seen from the side, pull out Misfeed in the transport area, exit area and fusing area Open the front cover Turn the transport lever to the leftCheck to see if any paper is misfed in the exit area Close the paper tray and the side covers Gently close the upper right side cover Remove the misfed paper Misfeed in the optional duplex module Push the duplex module back into the copier Slide the paper guide if needed Maintenance Required When the message Ready to COPY. Maintenance Required Toner Collecting Container of Transfer Unit Troubleshooting Example TroubleshootingSelf-diagnostic function General Information Part Names and Functions Part Names and Functions Interrupt key and indicator p Color Copy Start key and indicatorBlack Copy Start key and indicator LCD touch panel Custom Settings key Initial settingsInformation key p Sided Copy key User Maintenance Document glass and document cover Contrast of the touch panel can be adjusted as below Contrast Specifications Copier Duplex Module optional SpecificationsReversing Automatic Document Feeder optional Emission Concentration measurement according to RAL UZ62 Printing mode Standby modeAcoustic Noise Emission measurement according to ISO7779 Optional Equipment System Configuration BIN Staple Sorter AR-SS2 Part Names Using the staple sorter BIN Staple Sorter AR-SS2 Sorter Capacity Using the document glass Staple sort Using the optional Radf Up to 20 sets can be made Manual stapling Set of copies will be stapled Staple cartridge replacement Remove the empty staple cartridge from inside Staple box Remove the rear paper and tape from the cartridge Staple jam removal Return the lever to its original position BIN Staple Sorter AR-SS2 Slide the sorter back toward the copier and latch it into Copier will stop when a misfeed occursMisfeed removal Specifications Paper Weight 13 ~ 28 lbs17 ~ 28 lbs 2 x 11 x 12 x Paper size 2 x Paper weight 15 lbs. to 28 lbs Large Capacity Tray AR-LC2N When the button lamp goes out, pull the paper tray out Large Capacity Tray AR-LC2NFan the copy paper Load the paper onto the feed table Capacity tray Remove any misfed paper from the copier and the large Remove the misfed paper Gently push the tray back into place Finisher AR-FN4 Offset mode NON Offset modeFinisher AR-FN4 Offset stack Staple print Printed output will be stapled When the staple cartridge is empty, the message Slide Replace the staple as follows FinisherAR-FN4 Staple jam removal Finisher AR-FN4 Misfeed removal Finisher AR-FN4 Page Page Sharp Corporation