Sharp AR-C160 operation manual Adding Toner, Open the front cover

ADDING TONER

The message “		TONER SUPPLY IS LOW.		” will appear in	For best copying results, be sure to use
the message display before the toner supply is completely empty.					only Sharp Genuine Supplies which are
(	indicate toner types. Y : yellow, M		: magenta, C : cyan, BK :		designed, engineered, and tested to
black) If copying is continued, copies will gradually become lighter until					maximize the life and performance of
the copier stops and the message display changes to “ADD					Sharp copiers.
TONER.PRESS		.” indicating that the toner supply is empty. Toner			Look for the Genuine Supplies label on
can be added any time after the message “			TONER SUPPLY IS		the toner package.
LOW.	” appears. To add toner, stop the copier and proceed as below.

When either message appears, you can use the INFORMATION key
for detailed information as necessary.
If any color toner supply is empty, color copying cannot be performed.
However, black/white copying can be performed unless the black
toner supply is empty.
During long copy runs of multiple originals containing many images
and/or dark shades, “TONER REPLENISHMENT IN PROGRESS.” may	GENUINE SUPPLIES
appear and the copier may stop making copies even though toner is
left.
The copier will automatically cycle and replenish the toner to the
normal level and then the START key indicator will light up. Press the
START key to resume copying.

CHAPTER4

1	Open the front cover.
	SUPPLIES
	Adding toner

Push the lock release buttons on both sides of the toner

2 box and pull the toner box out slowly until it stops.

●The toner hoppers are located as below.

Magenta Black

Yellow

Cyan

4-5