3-14
CHAPTER3SPECIAL FUNCTIONS Covers
COVERS
The COVERS mode is used to place covers on the front, back, or both
the front and back of multipage documents.
●To use the COVERS mode, an optional RADF must be installed.
●Front cover sheets can be copied on, but only on the front side even
in the 1-sided to 2-sided and 2-sided to 2-sided copy modes.
The back side of the original designated as the cover will not be
copied.
●Back cover sheets cannot be copied on, either on the front side or on
the back side.
●Cover sheets must be fed from the bypass tray and must be the same
size as the copy paper being used to copy the document.
●When the COVERS mode is selected, the stream feeding mode of
the RADF will always be off.
1Place the originals in the optional document feeder tray.
2Press the 2-SIDED COPY key and select the desired
duplex mode if needed. Press the “OK” key to close the
duplex selection window.
●To copy in the 1-sided to 2-sided or 2-sided to 2-sided copy
mode, an optional duplex module (AR-DU2N) must be installed.
3Press the SPECIAL MODES key.
●The SPECIAL MODES screen will appear.
4Press the “COVERS” key on the touch panel.
●The setting screen for COVERS will appear.
Covers
OUTPUT
2-SIDED
COPY
AUTO
2-SIDED
COPY
SPECIAL
MODES
READY TO
READY TO COPY.
SPECIAL MODES
MARGIN SHIFT ERASE
IMAGE EDITCOVERS
CENTERING
DUAL PAGE
COPY
COLOR
ADJUSTMENTS
TRANSPARENCY INSERTS
OK
AUTO
EXPOSURE PAPER SELECT
100%
COPY RATIO
8/ 11AUTO
12
LOAD COVER STOCK INTO BYPASS-TRAY.
COVERS
FRONT
BACK
FRONT+BACK
YES
NO
PRINT ON FRONT COVER?
CANCEL
OK
OK