Sharp AR-C160 Using the Touch Panel, How to use the touch panel, Selection of function

CHAPTER1

USING THE TOUCH PANEL

How to use the touch panel

GETTING STARTED Using the touch panel

READY TO COPY.
	1.8/2	11	PAPER TYPE
			16~28 lbs.
	1
	2.11	17	28+~35 lbs.
	3.8/2	14	35+~75 lbs.
	1
			TRANSPARENCY
AUTO	PAPER SELECT		100%
EXPOSURE			COPY RATIO

You can set or cancel a function displayed on the touch panel by pressing (touching) a key with a finger. The touch key operation can be confirmed with a beep tone (and highlighting of the touch key).

★KEY OPERATOR For the beep tone to be heard, the beep tone must be enabled by a key operator program. See page 27 of the KEY OPERATOR’S GUIDE.

A grayed out function key represents unavailability of that function. If a grayed out key is pressed, two short beeps will sound.

RECALL STORE/DELETE

Selection of function

		OK
ERASE	CANCEL	OK
EDGE ERASE		1/2 (0~1)inch
CENTER ERASE
EDGE+CENTER
ERASE

READY TO COPY.
SPECIAL MODES			OK
MARGIN SHIFT		ERASE	DUAL PAGE
			COPY
CENTERING		TRANSPARENCY INSERTS
COVERS	COLOR		IMAGE EDIT
	ADJUSTMENTS
AUTO	AUTO	1	100%
		8/2 11
EXPOSURE	PAPER SELECT		COPY RATIO

To register the selected settings for a function, press the “OK” key on the setting screen. The settings indicated by a highlighted display will be registered as a selected function.

Some special functions can be selected by pressing the relevant keys on the SPECIAL MODES screen (page 3-4) or on the IMAGE EDIT menu (page 3-26) to highlight the keys. To cancel these functions, press the relevant keys again to return the keys to the normal display. These functions are: Dual page copying, Centering, Transparency inserts, Neg./ pos. reverse, Mirror image, and 11x17 full-bleed.

1-8