Sharp AR-C160 Using the Radf, Adjust the original guides to the size of the originals

USING THE RADF

OriginalCopy

READY TO COPY.(DOCUMENT FEEDER MODE)

ORIGINAL 81211

1.81211

2.1117

3.81214

AUTO	AUTO	1	11	100%
		8/2
EXPOSURE	PAPER SELECT			COPY RATIO

N

1 2 3 INTERRUPT

4 5 6

CLEAR CA

ALL

7 8 9

AUDIT PROGRAM C

0 P CLEAR

3 INTERRUPT

6

CLEAR CA

ALL

9

PROGRAM C

P CLEAR

1-sided copies of 1-sided originals

Adjust the original guides to the size of the originals and

	● Be sure to remove any original from the document glass before			2CHAPTER
1 set the originals face up in the document feeder tray.
	● The original size will be indicated on the touch panel, and the
	paper tray with the corresponding paper size will be automatically
	selected.
	setting the originals in the document feeder tray. If an original is
	left on the document glass, the original reminder indicator will
	blink. Remove the original from the document glass in this case.			MAKING
	● If copy paper of the required size is not installed in any of the
	trays, the following message will appear.
				COPIES
	LOAD	" x	" PAPER.
	If a tray of the required size is not installed, use the bypass tray
	and press the “PAPER SELECT” key on the touch panel to select			Using
	the bypass tray.
	● To copy onto a different size paper, use the “PAPER SELECT”			the
	key to make the selection.
				RADF

Ensure that the 1-sided to 1-sided copying mode is

2 selected on the touch panel.

●When no icon is displayed in the area indicated in the illustration

(), the 1-sided to 1-sided copying mode is selected.

●If the 1-sided to 1-sided mode is not selected, press the 2-SIDED COPY key and then press the 1-sided to 1-sided key

() on the touch panel. Press the “OK” key to return to the basic screen.

Use the 10-key pad to enter the desired number of

3 copies.

●The number will be shown in the copy quantity display of the touch panel.

●Use the CLEAR ( C ) key to cancel an entry if a mistake has been made.

Press the COLOR COPY START () key or BLACK

4 COPY START () key.

●To perform color copying, press the COLOR COPY START

() key. To perform black/white copying, press the BLACK COPY START () key.

●To cancel a copy run, press the CLEAR ALL ( CA ) key. Copying will stop and the RADF will output any originals which have been fed. Also, the number in the copy quantity display will be reset to 0.

2-7