Sharp AR-C160 operation manual Two-sided copying with bypass tray

Place the first original face down on the document glass and make a copy.

● The first side of the copy can be made using any of the paper feed stations.

Remove the first original and place the second original face down on the document glass.

● Make sure the first and second originals are oriented in the same way on the document glass.

● If an optional document feeder is used, the originals must be fed one at a time.

Turn the first copy over without changing its top-bottom orientation and place it into the bypass tray.

● Be sure to feed the copies one sheet at a time.

SPECIAL PAPERS (manual feed)

Two-sided copying with bypass tray

Two-sided copies can be made manually using the bypass tray. The procedure described below is useful for users of the copier without an optional duplex module (AR-DU2N).

CHAPTER2

2 1

2 1

4 3

4 3

1

2

3

1 2

MAKING COPIES Special papers (manual feed)

	8/2	11
	1
.8/2 11	PAPER TYPE
	16~28 lbs.
1
11 17	28+~35 lbs.
1	35+~55 lbs.
8/2 14
	TRANSPARENCY
ER SELECT		100%
	COPY RATIO

INFORMATION

INTERRUPT

CUSTOM

SETTINGS

CLEAR CA ALL

C

CLEAR

Press the “PAPER SELECT” key and select the desired

4 paper type in the bypass tray section.

Press the COLOR COPY START () key or BLACK

5 COPY START () key.

2-15