Sharp AR-C160 operation manual Troubleshooting

TROUBLESHOOTING

Always check the message display whenever the copier stops or operation is not possible. The messages will give you easy-to-follow directions. If the messages do not give specific instructions, check the list below.

Problem	Solution
	● Copier plugged in?	Plug the copier into a grounded outlet.
Copier does not operate.
	● Power switch on?	Turn the power switch on.
Copies are too dark or too	● Copy density properly adjusted?	See page 2-16.
light.
Blank copies.	● Is the original placed face down on	Place the original face down on the
	the document glass or face up in	document glass or face up in the RADF.
	the optional RADF?
	● Paper too heavy?	Use copy paper within the specified
		range. See page 4-2.
Copies smear if rubbed.
	● Paper damp?	Replace with dry copy paper. Be sure
		to store copy paper in a dry location.
Copy size is different from	● Paper size indicator properly set?	When changing the copy paper size in
the selected paper size.		a tray, be sure to adjust the paper size
		indicator. See page 4-4.

CHAPTER5 COPIER TROUBLE? Troubleshooting

5-13