Troubleshooting

 

 

Problem

 

Recommended Action

Page

 

 

The battery

Make sure the main power switch is in the

34, 35

 

 

pack does not

 

“OFF” position. The battery pack does not

 

 

 

charge.

 

charge when it is connected to the DVD player

 

 

 

 

 

while DVD player power is turned on.

 

 

 

 

A warm battery takes longer than normal to

 

 

 

 

charge. Wait until the battery cools to normal

 

 

 

 

 

temperature before trying to charge it.

 

 

 

Power does

Replace the battery pack with a charged one or

33-36

 

 

not turn on.

 

switch to AC adapter power.

 

 

 

The battery

Charging of a battery pack may become

 

 

charge lamp

 

disabled (and the charge lamp may fail to light)

 

 

Operation

does not light

 

whenever heat from the DVD player causes the

 

 

(the battery

 

internal temperature of an attached battery pack

 

 

 

pack does not

 

to rise above certain level. When this happens,

 

 

 

charge).

 

remove the battery pack from the DVD player.

 

 

 

 

 

Charging will start automatically when battery

 

 

Pack

 

 

pack internal temperature drops to a safe level.

 

 

 

Make sure the temperature of the battery pack

86

 

Battery

 

 

is within the allowable temperature range of

 

 

 

 

10° C to 30° C for charging.

 

 

 

 

 

 

 

 

 

Check to make sure that the AC adapter DC

33

 

 

 

 

cable is connected correctly.

 

 

 

The battery

Try disconnecting the AC adapter DC cable from

 

 

charge lamp is

 

the battery pack and then reconnecting it. If the

 

 

 

flashing.

 

battery pack is attached to the DVD player, first

 

 

 

 

 

disconnect the battery pack DC cable from the

 

 

 

 

 

DVD player before performing the above step.

 

 

 

 

Try charging another battery pack. The same

 

 

 

 

symptom occurring with another battery pack

 

 

 

 

 

may indicate a problem with the AC adapter. If

 

 

 

 

 

the other battery pack charges normally, it can

 

 

 

 

 

indicate a problem with the first battery pack or

 

 

 

 

 

that the first battery pack has reached the end

 

 

 

 

 

of its normal service life.

 

 

Cannot record to

Make sure the connected audio equipment is

72

 

an MD.

 

turned on.

 

 

 

 

• Check if linear PCM is selected as the audio mode.

 

 

When recording from

When the space between tracks of some disks is

 

a CD to an MD over

 

very short, two tracks can be recorded as a single

 

 

an optical digital

 

track, which causes a mismatch of track numbers.

 

 

connection, the CD

• CD and MD track numbers may not match when

 

 

track numbers and

 

 

 

recording from a CD using programmed play or

 

 

MD track numbers

 

 

 

 

direct skip.

 

 

do not match.

 

 

 

 

 

 

 

 

 

 

 

 

GB 90

 

 

 

 

Page 93
Image 93
Sharp DV-L70S, DV-L70BL operation manual When recording from