Sharp FO-1530 operation manual Connections, Connecting the Handset, Connecting the power lead

all-fo1530a.book Page 11 Tuesday, December 5, 2000 2:07 PM

Connections

Installation

Connections

Connecting the Handset

Connect the handset as shown and place it on the handset rest.

♦The ends of the handset lead are identical, so they will go into either socket.

Make sure the handset lead goes into the unmarked socket on the side of the machine!

Use the handset to make ordinary phone calls, or to transmit and receive faxes manually.

Connecting the power lead

Plug the power lead into a 230-240 V, 50 Hz, grounded AC (3-prong) outlet.

Caution!

♦Do not plug the power lead into any other kind of outlet. This will damage the machine and is not covered under the warranty.

♦The mains outlet (socket outlet) should be installed near the equipment and be easily accessable.

The machine does not have a power on/off switch, so the power is turned on and off by simply plugging in or unplugging the power lead.

Note: If your area experiences a high incidence of lightning or power surges, we recommend that you install surge protectors for the power and telephone lines. Surge protectors can be purchased at most telephone specialty stores.

1.

11