Sharp FO-1530 operation manual Timer Operations, Setting a timer operation, 0 9 2

all-fo1530a.book Page 78 Tuesday, December 5, 2000 2:07 PM

Timer Operations

Timer Operations

The Timer function allows you to set a transmission and/or polling operation to be performed automatically at a time you specify. One transmission operation and one polling operation can be set at any one time, and the times they will be performed can be specified up to 24 hours in advance.

♦You can use this function to take advantage of lower off-peak telephone rates without having to be there when the operation is performed.

Note: Only a Speed Dial number can be used to dial the receiving machine.

Setting a timer operation

1 Press these keys:

FUNCTION

1

TIMER MODE

2 Press # to set a transmission

operation (SEND MODE), or * to set a polling operation (POLLING MODE).

POLLING SEND

or

3 Press 1 to select SET.

1

4 Enter the time at which you want

the operation to take place (2 digits for the hour and 2 digits for the minute).

0 9 2 5

Example: 9:25

5 Press the START key.

START

6 Enter the Speed Dial number of the receiving fax machine.

•If this is a polling operation, go to Step 10.

0 5

(Example)

7 Press the START key.

START

8 Adjust the resolution and/or contrast if desired (skip to the next step if you don't want to change settings).

RESOLUTION

78