Sharp FO-1530 operation manual Loading Printing Paper

all-fo1530a.book Page 18 Tuesday, December 5, 2000 2:07 PM

Loading Printing Paper

Loading Printing Paper

The paper tray holds the paper on which received documents and copies are printed. Up to 200 sheets of A4 size paper from 60 to 75 g/m2 can be loaded in the tray. Less sheets can be loaded when using heavier paper. The maximum allowed paper weight is 90 g/m2.

Note: When receiving or copying documents, do not allow more than 100 pages to collect in the received document outlet. Otherwise, the outlet may become obstructed, causing paper jams.

Caution!

Do not use the blank side of paper that has already been printed on.

1 Remove the paper cover if it is on the paper tray.

•If you are going to load legal size paper, flip up the paper tray extender.

3 Pull the paper release plate toward you and insert the stack of paper into the tray, print side down.

•If paper remains in the tray, take it out and combine it into a single stack with the new paper before adding the new paper.

2 Fan the paper, and then tap the edge against a flat surface to even the stack.

18