Sharp FO-1530 operation manual Make sure that the gear engages with the gear below it

all-fo1530a.book Page 16 Tuesday, December 5, 2000 2:07 PM

Loading the Imaging Film

7 Insert the empty spool into the back of the compartment so that the gear and the flange fit into the slots on the sides of the compartment.

•Make sure that the gear engages with the gear below it.

8 Wind the film slightly (rotate the gear on the right side of the empty spool) so that there is no slack in the film. Make sure that both edges of the film wind onto the spool evenly.

9 Close the print compartment cover,

making sure it clicks into place.

Caution!

Close the cover slowly to make sure it doesn't pinch your fingers.

10 Load paper in the paper tray and

then press the following keys to initialize the film.

Note: Paper must be loaded before the film can be initialized. To load paper, see Loading the Printing Paper.

FUNCTION

6

START

INITIALIZE FILM

16