Sharp FO-1530 operation manual From memory, see If the memory becomes full on

all-fo1530a.book Page 95 Tuesday, December 5, 2000 2:07 PM

	Messages and Signals
MEMORY IS FULL	The memory is full. This may occur during fax reception
	if too much data is received before the pages can be
	printed out. If faxes have been received to memory
	because printing is not possible (an additional message
	will indicate the problem), resolve the problem so that
	printing can continue (see Substitute Reception to
	Memory on page 51). If you are attempting to transmit
	from memory, see If the memory becomes full on page
	74.
MEMORY PRINTING	The fax is preparing to or printing out a document from
	memory.
NO DATA	This appears if you attempt to search for an automatic
	dialling number when none have been stored.
NO # STORED	You have tried to dial or clear a Rapid Key or Speed Dial
	number that hasn’t been programmed (a full number
	hasn’t been assigned to it).
OFF HOOK	This appears if you forgot to replace the handset after
	using it to dial and send a fax. Replace the handset or
	press the STOP key to clear the message.
ON HOOK DIAL	The SPEAKER key has been pressed and the fax
	machine is waiting for you to dial.
OUT OF PAPER	You are out of printing paper. Load paper as explained
	in Loading Printing Paper on page 18.
OVER HEAT	The print head has overheated. Operation can be
	continued after it cools.
PAPER JAMMED	The printing paper is jammed. See the following section,
	Clearing Paper Jams.
READY TO SEND	A document has been loaded and the fax machine is
	waiting for you to begin faxing or copying.

10. Trouble- shooting

95