Sharp FO-1530 operation manual Direct Keypad Dialling, Speed Dial

all-fo1530a.book Page 38 Tuesday, December 5, 2000 2:07 PM

Sending a Fax by Automatic Dialling

2 Press the SPEED DIAL key and then enter the Speed Dial number by pressing the numeric keys.

SPEED

DIAL

0 9

(Example)

•To enter numbers 1 through 9, first enter 0 and then the number.

3 Check the display. If the name or number shown is correct, press the START key. (If not, press the STOP key and then repeat Step 2.)

START

Direct Keypad Dialling

You can also enter a full number with the number keys and then press the START key to begin dialling. You can use this method to dial a full number when you don’t need to speak to the other party before faxing.

1 Load the document(s).

READY TO SEND

•Set the resolution and/or contrast if

desired. RESOLUTION

2 Enter the number of the receiving machine by pressing the numeric keys.

ABC DEF

1 2 3

GHI JKL MNO

4 5 6

PQRS TUV WXYZ

7 8 9

•If a pause is required between any of the digits to access a special service or an outside line, press the REDIAL key (two seconds per pause). The pause will appear as a hyphen. Several pauses can be entered in a row.

3 Check the display. If the number of the receiving machine shown is correct, press the START key.

START

•If it is not correct, press the STOP key to backspace and clear one digit at a time, and then re-enter the correct digit(s).

38