Sharp FO-1530 operation manual Dialling and transmission problems, Problem, Solution, SPEAKER key

Models: FO-1530

1 105
Download 105 pages 43.68 Kb
Page 92
Image 92
Dialling and transmission problems

all-fo1530a.book Page 90 Tuesday, December 5, 2000 2:07 PM

Problems and Solutions

Dialling and transmission problems

Problem

 

Solution

 

 

 

No dial tone when you pick

Make sure the handset lead is connected to the

up the handset or press the

 

correct socket. See Connecting the handset on page

SPEAKER key.

 

11.

 

 

 

Dialling is not possible.

Make sure the power lead is properly plugged into a

 

 

power outlet.

 

Make sure that the telephone line is properly

 

 

connected to both the TEL. LINE socket and the wall

 

 

socket.

 

Make sure that the fax machine is set to the correct

 

 

dialling mode for your telephone line. See Connecting

 

 

the telephone line cord on page 12.

 

 

 

The power is on, but no

Make sure that the receiving machine has paper.

transmission takes place.

 

 

 

Make sure that the telephone line cord is plugged into

 

 

the TEL. LINE socket, and not the TEL. SET socket.

 

If the receiving machine is in manual mode with no

 

 

attendant, reception will not be possible.

 

Check the display for error messages.

 

Pick up the handset and check for a dial tone.

 

 

 

Nothing is printed at the

Make sure that the document for transmission is

receiving end.

 

placed face down in the feeder.

 

 

 

A distorted image is

Noise on the telephone line may cause distortion. Try

received at the other end.

 

sending the document again.

 

Make a copy of the document on your fax machine. If

 

 

the copy is also distorted, your fax machine may need

 

 

service.

 

 

 

90

Page 92
Image 92
Sharp FO-1530 Dialling and transmission problems, Problem, Solution, SPEAKER key, the telephone line cord on page