Sharp FO-1530 Adjusting the Resolution and Contrast, Resolution settings, Contrast settings

all-fo1530a.book Page 29 Tuesday, December 5, 2000 2:07 PM

Adjusting the Resolution and Contrast

Adjusting the Resolution and Contrast

If desired, you can adjust the resolution and contrast before sending a document.

The default resolution	You must adjust the settings
	each time you don’t want to use
setting is STANDARD
	the default settings.
and the default
contrast setting is
AUTO.

2. Sending Documents

Note: The resolution and contrast settings are only effective for sending a document. They are not effective for receiving a document.

Resolution settings

STANDARD	Use STANDARD for
	ordinary documents.
	This setting gives you
	the fastest and most
	economical
	transmission.
FINE	Use FINE for
	documents containing
	small letters or fine
	drawings.

SUPER FINE Use SUPER FINE for documents containing very small letters or very fine drawings.

HALF TONE Use HALF TONE for photographs and illustrations. The original will be reproduced in 64 shades of gray.

Contrast settings

AUTO	Use AUTO for normal
	documents.
DARK	Use DARK for faint
	documents.

1 Load the document(s).

•The document must be loaded before the resolution and contrast can be adjusted.

29