Sharp FO-1530 operation manual Answering machine connection, General problems, Problem, Solution

all-fo1530a.book Page 92 Tuesday, December 5, 2000 2:07 PM

Problems and Solutions

Answering machine connection

Problem		Solution
The answering machine	•	Make sure that the reception mode is set to A.M..
connection does not		(see page 57).
operate properly.
	•	Make sure your fax machine's TEL. LINE socket is
		connected to the wall socket. Make sure your fax
		machine's TEL. SET socket is connected to your
		answering machine's telephone line socket (not the
		answering machine's extension phone socket).
	•	Make sure your answering machine's outgoing
		message is under 10 seconds.
	•	Make sure that the Quiet Detect Time setting is set to
		three or four seconds (see page 58).

General problems

Problem		Solution
Information cannot be	•	Make sure the fax is plugged in and the imaging film
programmed in the fax.		and paper have been loaded. (Programming is not
		possible if the imaging film and printing paper have
		not been loaded.) See Loading the Imaging Film and
		Loading Printing Paper in Chapter 1.
Nothing appears in the	•	Make sure the power lead is properly plugged into a
display.		power outlet.
	•	Connect another electrical appliance to the outlet to
		see if it has power.
The machine does not	•	If a beep sound is not made when you press the
respond when you press		keys, unplug the power lead and then plug it in again
any of its keys.		several seconds later.

92