Sharp FO-1530 operation manual Entering and Using Programs, Initial procedure

all-fo1530a.book Page 80 Tuesday, December 5, 2000 2:07 PM

Entering and Using Programs

Entering and Using Programs

If you frequently perform the same operation involving the same party, you can program all the steps of the operation into one Program Key. This allows you to perform the operation by simply pressing that key.

♦Rapid Keys 16/P1 and 17/P2 can be used as Program Keys. However, a key cannot be used if it is already being used for Rapid Key Dialling.

♦Only Speed Dial numbers can be used to enter fax numbers of receiving machines in the Program Keys. Full numbers cannot be entered.

♦If the program is for a regular transmission or polling operation, a timer setting can be included to have the operation performed automatically at a selected time.

♦To clear a mistake, press the STOP key.

Initial procedure

To program a Program Key, first perform the following procedure. After you have completed this procedure, go to the procedure for the specific operation you want to program (see the following pages).

1 Press these keys:

FUNCTION

7

PRG.ENTRY MODE

2 Press 1 to select SET.

1

3 Select a Program Key ("16/P1" or "17/P2") to select it.

16/P1	or	17/P2
35		36

4 Enter a name for the program by pressing the letter entry keys. (If you don’t want to enter a name, go directly to Step 5.)

7	7	7		7	7
4		4	4		2	2
7		7	7	7		SPEAKER	7
						7

Example: SHARP

5 Press the START key.

START

80