Sharp FO-1530 Loading the Imaging Film, Do Not Discard The Green Gears And The Green Flange

all-fo1530a.book Page 14 Tuesday, December 5, 2000 2:07 PM

Loading the Imaging Film

Loading the Imaging Film

Your fax uses a roll of imaging film to create printed text and images. The print head in the fax applies heat to the imaging film to transfer ink to the paper. Follow the steps below to load or replace the film.

The initial starter roll of imaging film included with your fax can print about 60 A4-size pages.

When replacing the film, use a roll of Sharp UX-15CR imaging film. One roll can print about 500 A4-size pages.

1 Press the release marked OPEN

and open the print compartment cover.

Caution!

The printing head (the strip of metal on the underside of the cover) applies heat to the printing film. It may be hot if a document has just been printed.

2 If you are replacing the imaging

film, take the old film out of the printing compartment and remove the three (3) green gears and the green flange from the ends of the spools.

DO NOT DISCARD THE GREEN GEARS AND THE GREEN FLANGE!

14