Sharp FO-475 operation manual Blocking Reception of Unwanted Faxes, Comments

Blocking Reception of Unwanted Faxes

Blocking Reception of Unwanted Faxes

The Anti Junk Fax function allows you to block reception of faxes from parties which you specify. This saves paper by not printing out unwanted "junk" faxes.

To use this function, first turn it on by setting Option Setting 13 to YES as described in Chapter 8, and then enter the fax numbers from which you do not want to receive faxes as shown below.

Comments:

∙The call will be terminated by the fax, however, the connection will remain until the caller hangs up or the line times out.

∙Up to 5 numbers can be entered in the Anti Junk Number List.

∙The Anti Junk function will not operate for a number which has been stored as a priority or direct call number.

∙To clear a number from the Anti Junk Number List, you need to know the 1-digit number which identifies it. If you have forgotten this number, print out the Anti Junk Number List as described in Chapter 9.

1 Press the keys shown at right.	FUNCTION
STORE JUNK # will appear in the	3
display.

2 Press 1 to store a number in the Anti Junk

Number List, or 2 to clear a number from the list.

3 Storing: Enter a 1-digit number from 1 to

1 or 2

5. This number identifies the fax/voice	1
number you will store in the next step.
Clearing: Enter the number which	(Example)
identifies the fax/voice number you want
to clear, and go to Step 5.

Special Func-	tions
7.

77